-
E-mail
shiruining918@163.com
-
Phone
15830987788
-
Address
Xinshi North Road, Qiaoxi District, Shijiazhuang City
Product Categories
Shijiazhuang Dongya Electronic Technology Co., Ltd
High temperature version of pipeline dust detector
NegotiableUpdate on 01/01
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The high-temperature version of the pipeline dust detector can be customized for both small and large ranges. The measurement medium has a wide range and can measure dust in common media, which can be widely used in various industries. Stable performance, suitable for high temperature environments under various equipment pipelines and flues.
Product Details
High temperature version of pipeline dust detectorProduct Overview
The DFM/TS/GW device provides the current new AC coupling technology. The working principle of this monitoring system is to use the charge induction generated by the flow of dust particles around the probe to confirm the online emission amount (mg/sec) or emission concentration (mg/m3) of dust particles. After direct calibration, this system can also be used for online monitoring of emission concentration (unit=mg/m3).
Product advantages:
1. The product adopts advanced charge induction technology, with high sensitivity to dust detection, real-time online continuous detection, and accurate data.
2. Both ultra small and ultra large ranges can be customized.
3. The measurement medium has a wide range and can measure dust in common media, which can be widely used in various industries.
4. Stable performance, suitable for high temperature environments under various equipment pipelines and flues.
5. The installation and use are consistent with the two-wire pressure transmitter, with simple operation, easy installation, and reliable operation.
High temperature version of pipeline dust detectorProduct Features
The DFM/TS/GW dust concentration detector is an integrated structure consisting of a sensor unit and a transmitter unit.
2. The dedicated sensor is a passive type without electronic circuits. High sensitivity, unaffected by vibration, no dust contamination, high reliability, and long lifespan.
3. The current signal output by the transmitter is electrically isolated from the sensor unit, achieving interference free transmission of the output current signal.
4. Two wire (4-20mA) current signal generation and output, strong anti-interference ability, easy to transmit over long distances, and no special requirements for transmission wires. The output current is linearly related to the dust concentration, which facilitates subsequent PLC data processing.
5. Modular design allows for individual replacement of sensor units and transmitter units.
6. Long lifespan, all metal casing and connectors.
