High temperature load reduction soft solution droplet performance tester

Xiangtan Xiangke GHDYHigh temperature load reduction soft solution droplet performance tester

1、 Overview:

This equipment is mainly used for sintering preparation under controlled atmosphere conditions to determine the performance of iron ore under load and permeability. It can also be used for evaluating the high-temperature metallurgical properties of natural block ores, sintered ores, ball ores, and comprehensive furnace materials, meeting the requirements of the standard GB/T34211-2017 method for determining the performance of iron ore under high temperature load reduction soft melt droplets. The silicon molybdenum rod is used for heating, and the temperature control system has overcurrent and constant current function to extend the service life of the silicon molybdenum rod. The furnace material is made of imported high-quality materials, with fast heating speed, good insulation performance, and energy-saving. Connect the computer to control the display of parameters such as softening start temperature, softening end temperature, melting start temperature, drip temperature, softening interval, and softening melting interval of the test sample, and automatically generate a detection report.

2、 Main technical parameters

1. Working temperature range: room temperature to 1600 ℃.

2. The furnace material is made of imported high-quality materials, with fast heating speed, good insulation performance, and energy-saving.

3. Furnace size: Φ 100 × 650mm,

4. Displacement variation: 0-100mm, resolution of 1um.

5. Constant pressure loading: 1.0 × 980 × 102Pa. The total weight loaded is 44.16Kg, with self weight and weight added as a counterweight

6. Sample size: Φ 75 × 70mm.

7. Sample particle size: 10-12.5mm

8. Power supply: 380V/50Hz; Power ≤ 12KW.

9. Reduce gases such as CO and N2 in the atmosphere.

10. Electronic balance: 3Kg, 0.1g,

11. Heating element: silicon molybdenum rod,

12. The fully computer-controlled test displays parameters such as the softening start temperature, softening end temperature, melting start temperature, drip temperature, softening interval, and softening melting interval of the sample, and automatically generates a detection report.

Xiangtan Xiangke GHDYHigh temperature load reduction soft solution droplet performance testerInstrument configuration:

1. One main unit of high-temperature load reduction soft melt dripping instrument (with corundum tube),

2. One transformer cabinet,

3. 1 Lenovo computer,

4. One test software,

5. 1 set of communication interface and data cable,

6. 1 sample maker,

7. Four silicon molybdenum rods

8. One B-grade thermocouple

9. 1 set of weights,

10. Two exhaust pipes,

11. One fan,

12. 1 set of graphite accessories,

13. The purchaser shall provide their own gas source.