High temperature and high pressure viscosity meter/SGS tester

M7540High temperature and high pressure viscosity meter/SGStester

I. Overview

M7540 HPHTViscosity meter/SGSThe tester can test the mud once under simulated downhole conditions to obtain data related to measuring mud consistency, thickening time and static gel strength. The innovative hardware design of the device includes a mechanism to prevent hydraulic fluid from mixing with the sample, and a special design of rolling bearings on the propeller shaft to minimize friction measurement errors.

Choose between two different test paddles, one is the standard used for viscosity meter testingAPIPaddle, another type isMACS II®-typeSGSThe paddle is used to test the static gel strength. The free premium software that comes with each unit allows users to quickly and efficiently build test steps, run tests, and interpret test results.
Durable components provide precise measurements

The device is equipped with rotating blades that can rotate at speeds up to250turn/Divide. Place the cement slurry in a temperature controlled and pressure controlled pressure chamber, and test it under user set conditions using the accompanying software. The blade is driven by a servo mechanism through a magnetic coupling. The servo reads the torque to determine slurry consistency or static gel strength.M7540The maximum rated torque of the motor is0.637 N•mThe torque resolution is9.72e-6 N•mAll hardware components are based on industry standardsAPIStandardized manufacturing.
Simple operation setup, easy operation, reliable testing, high repeatability

M7540Enable operators to conduct experiments and reliable testing operations in the shortest possible preparation time. The design prevents the mixing of pressurized liquid and cement due to mixing.M7540It is also easy to install, use, disassemble, and clean.
To ensure the safety of operators, the software includes several innovative safety features. When the measured value of the reaction torque exceeds1800 lb/100 ft2At this time, the software will automatically close the test. It can also be set to automatically stop the motor at the end of the test or during the test process, and programmable heating after the test is completed/The cooling rate gradually increases/Reduce the temperature and activate the alarm system when it exceeds the set temperature.

2、 Technical parameters

l Temperature range: Maximum 400 ° F (204 ° C) (optional 450 ° F (232 ° C) Max.)

l pressure range:maximum20,000 psi

l Maximum torque range: 0.637 N•m = 5.63 lb/in

l Torque detection accuracy: 9.72e-6 N•m = 8.6e-5 lb/in

l SGStest scope:standard10 lb/100ft²～1800 lb/100ft²

l sample size:maximum530 ml

l Blade selection: APIStandard propeller bladeor SGSblade

l verify: By Weight per API StandardspressAPIStandard weight calculation

l heating power: 1,500 W

l Power requirements: 220-240V at 50/60 Hz

l Slurry cup rotation speed: 0-250 rpm

l staticGelspeed: 0.2 deg/min.

l pressure medium:White mineral oil

l Thickening time range: 0–100 Bearden Units (Bc)

l meet the standard: API Spec 10A；API 10B；ISO 10426-1

l size: 18” W x 21” D x 27” H

l weight: 85 lbs.

3、 Characteristics and advantages

• Measure mud consistency, thickening time and static gel strength under simulated downhole conditions.

Ball bearings are installed inside the rotating blades, greatly reducing measurement errors caused by friction and maximizing the accuracy and sensitivity of the instrument.

Effectively prevent the pressurized liquid from contaminating the cement slurry after mixing.

Accurate measurement is achieved through extremely precise servo. The device automatically adjusts the slurry. The control panel has been optimized and is easy to use.

You can choose from two convenient blade options:Mac II®typeSGSPaddle or standardAPIThickener blade. The dimensions of the blade and pressure chamber comply withAPI 10BStandard.

• Free software included with each unitWindowsCompatible, up to controllable8A unit.

Computer automatic control,6Channel data recording, easy to export.

Compare current test data with historical test data.

Intended to achieve maximum accuracy and operator safety. The security function of the software can be disabled1800 lb/100 ft2.The above tests. Also includes reliable temperature/pressure/consistency/Time safety and other functions.

• Constant temperature control system. The computer automatically controls temperature and pressure.