-
E-mail
jackzhang2002@163.com
-
Phone
15001318480
-
Address
Room 406, No. 2 Ganlu Garden, Shilibao, Chaoyang District, Beijing (Jintai Lida Office Building)
Product Categories
Zhongke Weidian (Beijing) Technology Co., Ltd
High temperature and high pressure fluid loss tester
NegotiableUpdate on 01/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The M7150 stirring fluid loss tester provides a reliable method for determining the fluid loss characteristics of mud and slurry under high temperature and high pressure conditions. It pre conditions and tests the cement slurry in the same pressure vessel, eliminating the need to manually transfer the heated slurry to another battery container, thereby reducing the operator's contact and danger with extremely hot slurry. The instrument is designed to be safe, reliable, economical, and easy to use.
Product Details
M7150High temperature and high pressure fluid loss tester
1 Overview:
M7150The stirred fluid loss tester provides a reliable method for determining the fluid loss characteristics of mud and slurry under high temperature and high pressure conditions.
It pre conditions and tests the cement slurry in the same pressure vessel, eliminating the need to manually transfer the heated slurry to another battery container, thereby reducing the operator's contact and danger with the extremely hot slurry. The instrument is designed to be safe, reliable, economical, and easy to use.
M7150Simulate the underground conditions under which mud dehydration may occur. Pour the cement slurry into a container and heat it with a heating jacket.PIDThe temperature controller controls the application temperature according toAPIStandardization, in150 rpmStir the mud with a rotating paddle at a certain speed. Apply back pressure to the back pressure container and collect it in the liquid accumulation container after passing through the filter medium. The fluid loss rate is determined by the amount of filtrate collected per unit time.
II Technical Specifications:
l size: 27'tallx 22'widex 18'deep
l maximum temperature: 400 °F (204°C)
l maximum pressure: 2,000 psi (13.8 Mpa)
l heating power: 800 W.
l power supply: 120Vor240 V, 50Hzor60 Hz
l External nitrogen gas: 2000 psi - 2500 psi (13.8 Mpa - 17.2 Mpa)
l cooling water: 40 psi
l Blender capacity: 500 ml
l include: Error in digital temperature control system1.0℉
l reference standard: API Recommended Practice 10B-2
III Features and advantages:
l The innovatively designed cooling jacket can quickly cool the testing unit to start the next test quickly.
l The newly designed pressure chamber cover can be interchanged with older pressure chambers.
l The propeller components with innovative design are durable, can be widely tested, and easy to maintain.
l The heating sheath can be locked in 30Tilt angle of ° for easy installation and extraction of testing units.
l The programmable temperature controller increases the temperature of the pressure vessel at the desired rate.
Similar Product Recommend
