High pressure inflatable non partial discharge test system

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high-voltage inflatable non partial discharge test system is used for insulation withstand voltage testing, partial discharge testing, and precision testing of GIS and GIL power equipment with high voltage and large capacity.

Product Details

High pressure inflatable non partial discharge test systemAll high-voltage components are enclosed in a shielded space

The integrated high-voltage isolation switch realizes the multi-purpose function of the equipment

Capable of withstanding the pressure of long-distance transportation

This product is a fully automatic power frequency withstand voltage testing equipment produced by our company. The control system has the characteristics of easy operation, good performance, safe and reliable use, beautiful appearance, durability, and easy mobility. It is a commonly used equipment for power maintenance departments in power supply enterprises, large power enterprises, metallurgy, power plants, railways, and other industries.

High pressure inflatable non partial discharge test systemAdopting microelectronic chip processing technology, touch screen control, and keyboard and mouse operation, the operation is simple and clear. After setting all test parameters, automatic testing is carried out without manual intervention.

Other name: No partial discharge power frequency withstand voltage test device, no partial discharge withstand voltage tester, fully automatic no partial discharge withstand voltage test device

Product Parameters

technical parameters

Input voltage V	200	200	400	400	400	400
Output voltage KV	50	100	150	200	250	300
Impedance voltage%	≤8	≤6	≤5	≤5	≤5	≤5
No load current%	≤6	≤6	≤5	≤5	≤5	≤5
Waveform distortion%	<3	<3	<3	<3	<3	<3
Rated capacity	50kVA
Low voltage current	0～116.3A
low voltage	0～430V
high voltage	0～100kV
high-voltage current	0～0.5A
Instrument voltage	0～100V
Accuracy of voltage measuring meter head	0.5% FS ± 3 words
Accuracy of current measuring meter head	0.5% FS ± 3 words
Overall accuracy	4%
Timing length	0~999.9 M (special mode can be used for long-term operation)
power supply voltage	AC380V ±10%； 50Hz±2 Hz
Usage environment	Environmental temperature 0-50 ℃
relative humidity	≤85%RH

Note:

1. The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice. If there is any act of theft or copying, legal responsibility will be pursued.

2. For more information on ultra-high voltage products, please enterProduct Center.

Product Characteristics

1. Voltage, current, time, status information, and prompt information are displayed on a 10 inch large LCD screen, with clear readings;

2. Full Chinese interface, simple and clear operation, suitable for various application scenarios;

3. Touch based operation, all functions can be pre-set in advance, improving the safety and reliability of the product;

4. Status reminder function, fully Chinese guided operation;

5. Alarm function, closing alarm, 5-second buzzer alarm prompt; Abnormal voltage signal acquisition, buzzing alarm;

6. Emergency stop function, during automatic control, this function can achieve emergency stop of boosting or lowering at any point;

7. Automatic timing function. When the voltage automatically rises to the set value during automatic control, the equipment automatically starts timing. When the timing time is up, the equipment automatically steps down and returns to zero position;

8. Manual control mode, similar to traditional electric up/down mode, is controlled by touch keys, and the device automatically determines the upper/lower limit. It provides protection against high voltage overvoltage and low voltage current, as well as high voltage overcurrent protection;

9. Adopting a combination of hardware and software anti-interference technology, with stable performance and strong anti-interference ability;

10. This instrument has the function of single operation or multiple operation conversion.