High and low temperature-humidity test chamber

NegotiableUpdate on 07/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high and low temperature humid heat chamber is suitable for performance reliability testing of industrial products under high and low temperature humid heat conditions. Under a series of temperature and humidity environment changes, such as high temperature, low temperature, high humidity, low humidity, and constant temperature and humidity tests, the performance indicators of components and materials of electronic and electrical products, automotive and motorcycle products, aerospace products, marine weapons, universities, research institutions, and other related products are tested in a high and low temperature and humidity chamber.

Product Details

The high and low temperature humid heat chamber meets the requirementsstandard

High and low temperature-humidity test chamberIt has a wide range of temperature and humidity regulation control, suitable for performance reliability testing of industrial products, and can meet the requirements of national standards GB2423.1, 2, 3, and 4 "Environmental Testing for Electrical and Electronic Products - Test A: Low Temperature Test Method, Test B: High Temperature Test Method, Test Ca: Constant Damp Heat Test Method, Test Db: Alternating Damp Heat Test Method". This test chamber complies with the national standards GB10592-89 "Technical Conditions for High and Low Temperature Test Chambers" and GB10586-89 "Technical Conditions for Warm Temperature Test Chambers".

High and low temperature-humidity test chamberStructural characteristics

High and low temperature-humidity test chamberThe product has excellent performance, beautiful appearance, and good reliability,High and low temperature damp heat test chamberIt is an ideal choice for laboratory environmental testing equipment

1The internal gallbladder is made of high-quality SUS304 stainless steel brushed plate, and the outer shell is made of Baosteel steel plate sprayed with plastic.Customization is also available (the shell is made of high-quality SUS304 stainless steel brushed plate)

2uniqueBTCBalanced temperature control method, stable and balanced heating capacity, regulating ideal temperature environment, and achieving high-precision and high stability temperature control

3The humidification method adoptsExternalquarantineHumidification of steam in boilers;

4It has the function of automatically selecting and operating the refrigeration circuit according to the temperature setting value, and the operation is simple

5Equipped with a specially designed hollow conductive heating glass window that is resistant to high and low temperatures, and a high brightness cold light source Philips lighting fixture, the sample can be observed at any time

6Control system: Original imported high-precision digital display instrument, imported execution electronic components

7The sealing strip inside the box is made of imported silicone rubber that is resistant to high and low temperatures, and has excellent sealing and insulation performance

8Original imported French Taikang compressor refrigeration system

9Mobile casters: Wear resistant, silent movement, with braking function.

10. Multiple safety protection devices: protection against overheating, overpressure, phase sequence, motor overheating and overload, etc.

High and low temperature damp heat test chamberMain technical parameters

typename		GDS—010	GDS—025	GDS—050	GDS—100
Studio size (mm)		500×400×500	600×600×700	800×700×900	1000×1000×1000
Dimensions (mm)		980×1020×1650	1080×1160×1800	1260×1220×1980	1480×1550×2200
technology require	temperature range	A: -20, B: -40, C: -60, D: -70~100 ℃, 150 ℃, 200 ℃ (optional)
	temperature fluctuation	≤±0.5℃
	temperature uniformity	≤±2℃
	Humidity range	30～98% R•H
	Humidity deviation	≤+2-3%RH
	Heating and cooling rate	Heating up ≥ 2～3℃/min		lower the temperature≤0.7～1℃/min
Cold and hot exchange system	Thermal insulation material	Ultra fine glass fiber/hard polyurethane foam
	Heater	Nickel chromium alloy electric heater（Stainless steel finned radiator
	Humidifier	The humidification method adoptsExternalquarantineHumidification of steam in boilers
	Cooling device	Multi stage membrane evaporator（Fin type multi-stage evaporator）
	air circulation	Single cycle, extended shaft, low noise, stainless steel centrifugal fan blades
	Cooling method	Unit cooling method/Dual (stacked) cooling method (air-cooled or water-cooled)
	compressor	French "Taikang" fully enclosed refrigeration compressor
control system	Control device	Korean ternary LCD touch screen instrumentMenu mode operation, can be directly programmed and solidified with curves
	Sensors	Imported ultra-fine 3mm PT100 platinum resistor
Security device		Leakage protection, over temperature protection, fast fuse, compressor overvoltage protection
Standard configuration		Internal heated insulated glass observation window: one 250 × 300 (mm), one test hole ￠ 50mm, two sample racks, and one lighting lamp
electricitysource		220V · 50HZ/(380V · 50HZ three-phase four wire system)

Exquisite quality, consistent!

Thank you very much for your trust and support of our company. We make the following commitments:

1. Provide technical solutions to customers before product sales, and offer problem-solving methods and technical consulting services according to customer requirements.

2. A dedicated customer service center is established, equipped with dedicated technical engineers responsible for pre-sales, in sales, and after-sales service of products, introducing product performance to users,Guide the use and maintenance of the product. combineProvide relevant information, solve difficult problems during use, and be a good user consultant.

3. The high and low temperature humid heat chambers sold are guaranteed to be crafted with precision and attention to detail in accordance with the contract requirements. And provide customers with complete technical information and corresponding technical training. Professional technicians will be dispatched to install and debug special equipment on site until the user is satisfied.

4. Assist users in training instrument and equipment administrators and operators to enable them to use and maintain instruments and equipment correctly, establish regular follow-up and maintenance systems, regularly track and follow up on the quality of products sold, and minimize potential losses caused by user failures;

5. The warranty period for the high and low temperature humidity box sold is twelve months from the date of installation,During the warranty period, if there are quality issues with the product itself, we will provide free repairs to customers.Outside the warranty period, provide maintenance services according to customer needs, and offer discounted factory prices for equipment accessories and vulnerable parts.