Hassmfg Controller ECV-750B-4X

Hassmfg controller Intellifaucet BC500Hassmfg controller EPV-250BHassmfg Controller EPV-312BHassmfg Controller ECV-312B-4XHassmfg Controller ECV-750B-4X

Part number: 1055

Usually shipped within 2-3 weeks

Shipping weight: 16.00 pounds

Batch and temperature control within a unit

2 to 23 GPM trafficHassmfg controller EPV-500B

Maximum 264 gallon batch

accurateHassmfg controller EPV-500BHassmfg Controller ECV-750B-4X

easy to use

Batch in gallons, liters, pounds, or kilograms

Batch pause/resume control

Durable and maintenance free design

Remote control interface

Temperature range from 32 degrees Fahrenheit to 203 degrees Fahrenheit

Five year warranty

User Manual

similar products

Smart faucet BC750

accessories

Flow meter kit

check valve

description

The Intellitapet BC500 batch processing and temperature control system is a unique product that not only provides accurate batch water, but also controls water temperature. Valves and electronic devices are built into a compact unit, greatly reducing system costs and complexity. To complete the system, only an external pulse flowmeter and a spring check valve are needed.

Using Intellitape makes it easy to perform accurate batches. Test results have shown that the ingredient accuracy is within ± 0.1% of the information provided by the flow meter. The accuracy of the flowmeter will affect the accuracy of the entire system. Intellitape achieves this accuracy by automatically reducing the flow rate at the end of the batch. The water temperature is also strictly controlled. Intellitape keeps the water temperature within ± 0.5 ° F.

Intellitape is easy to use. Each key on the keyboard has a function. The buttons have clear labels and are grouped according to common functions. To operate as a high-performance mixing valve, turn on the power, set the temperature, and then press' Start '. The valve opens and the tempering water flows within a few seconds. To run batches, set the number of batches and then press' Start new batch '. To stop the water flow and cancel the batch, please press' Stop '. To repeat the batch, please press' Start new batch 'again.

Batch can be selected in gallons, liters, pounds, or kilograms. The temperature can be selected in Fahrenheit or Celsius.

Batch processing can be paused infinitely without losing any accuracy. If the pause/resume batch button is pressed during the batch processing, the valve will close and the water flow will stop. Press the key again to start the water flow and restore the batch.

The precision regulating valve has a sturdy and maintenance free design. Valves and seals have undergone over 3 million cycles Each valve is equipped with Brushless DC stepper motor drive with lubricated ball bearings. Valve components are precision machined to achieve precise tolerances. The water flows continuously without pulsation.

The valve body is made of brass, and the valve seat is made of 303 stainless steel. The valve internals are made of 303 stainless steel with glass filled PTFE valve seat seals, providing a long service life.

The remote control interface allows remote computers, PLCs, or electronic temperature controllers to adjust the Intellitape set point temperature through a 4-20mA control signal. Two instantaneous dry contact closure inputs can be used to start and stop batches.

Each Intellitape comes with an AC power adapter, wall bracket, installation hardware, and user manual.

A complete batch processing system includes Intellitape, flow meter kit, and check valve. Check valves prevent air from entering the flow meter to improve accuracy.

All products of Haas Manufacturing Company come with a five-year warranty.

specification

Flow range at 50 psi: 2-23 GPM

Flow regulation: The keyboard can select 15-100% capacity

Valve port size: 1/2 inch

Valve Cv: 3.0

Entrance size: 4-inch center 1/2 NPT external thread

Export size: 3/4 NPT internal thread

Valve body material: brass, 303 stainless steel valve seat

Valve core material: 303 stainless steel

Control accuracy:+/-0.2 F (0.1 C)

Step response time: less than 4 seconds

Temperature setting increment: 0.1 (F or C)

Traffic setting increment: 1%

Control temperature range: 32-203 degrees Fahrenheit (0-95 degrees Celsius)

Batch range: 0.2 to 264 gallons, 0.1 gallon step size

Batch processing time: 11.5 minutes for 264 gallons at 23 GPM

Batch accuracy: ± 0.1% of flowmeter data

Remote input: Temperature 4-20mA current - start new batch and stop 2 switches closed

Calibration: Zero and Range Adjustment for Temperature Calibration

Inlet pressure: 10-100psi

Inlet temperature: 32-203 degrees Fahrenheit (0-95 degrees Celsius)

Power requirement: 12-16V DC (including AC power adapter)

(Provide international power supply - specified voltage and frequency)

Power consumption: maximum 23 watts

Environmental temperature range: 40-140 degrees Fahrenheit (4.4-60 degrees Celsius)

Environmental humidity range: 10-90% relative humidity

Shell: NEMA 12 (indoor, universal, dust-proof,

Dust and Drip - Not Waterproof) Standard: Exceeding the asse standard 1016

The EPV-250B electronic proportional valve is a low-cost, computer-controlled proportional valve that can directly accept 4-20mA or 1-5V DC control signals. Compared with competitors' valves, EPV has better performance, lower installation costs, and lower operating costs. It is an ideal choice for precise control of liquid and gas flow rates.

EPV has no recoil or lag. This greatly simplifies the control program. The valve is opened and closed by a zero clearance screw mechanism. The stepper motor is directly connected to the valve without the need for gears. This valve can also be manually operated.

The adaptive digital noise filter eliminates valve jitter caused by noise control signals. This digital filter can be disabled through the switch on the circuit board.

This valve is designed with a long-life rotating stem seal. Rotary seals are more durable and require less maintenance than reciprocating stem seals used in pneumatic valves. This seal will not cause unnecessary sticking or sliding of the pneumatic valve.

The compact size of EPV makes it easier to operate and allows it to be installed in smaller spaces. The size of an EPV is approximately one-third that of a pneumatic valve.

The installation cost of EPV is lower than similar pneumatic control valve systems. No need for compressed air, filters, regulators, I-P converters, or pneumatic air pipelines. Just connect the EPV to the control signal and power supply.

EPV comes with a five-year warranty. The reliable, low maintenance design and heavy-duty structure reduce expensive downtime.

EPV-250B has a brass valve body and 303 stainless steel valve internals. It has 1/2 inch fittings, 1/4 port size, and a Cv of 0.6.

Try our interactive valve size calculator to help you choose the right valve for your application.

Hassmfg controller Intellifaucet BC500Hassmfg controller EPV-250BHassmfg Controller EPV-312BHassmfg Controller ECV-312B-4X