HPT-3000 lubricating oil foam characteristic tester

This instrument is based on national standardsGB/T 12579Designed and manufactured according to the requirements specified in the Determination of foam Characteristics of Lubricating Oils, and used to determine fire-resistant oil, lubricating oil, gear oil, hydraulic oil and other oil products

The tendency and stability of foam formation. It is used to evaluate the tendency of lubricating oil to form foam and the stability of foam.

Instrument features:

1. Full Chinese LCD display, prompt operation menu, rich dynamic operation prompt information;

2. Two constant temperature baths24℃/93.5℃Separate temperature control and external preparation of cold source;

3. Automatic start, automatic timing, and memory saving;

Main technical indicators:

1Temperature control range: room temperature~99.9℃(High temperature bath)；

2Temperature control range:5~99.9℃(Low temperature bath); (Refrigerator comes separately)

3Temperature control accuracy:±0.2℃；

4Timer: 5Minutes and10Minutes, accurate to seconds;

5Timing accuracy:0.01%＋0.05Seconds (in)20℃）；

6Constant temperature heating power:650W；

7Auxiliary heating power:1000W；

8Cooling power:500W

9Air flow rate:94±5ml/minAdjustable;

10Timing accuracy:0.01%＋0.05Seconds (in)20℃）；

11Working power supply:AC220V±10%，50Hz；

12Environmental temperature:-10~+40℃；

13Relative humidity:≤85%；

14Power consumption of the whole machine: not greater than3000W.

15The permeability of gas diffusion head is2.45Kpa(250mmH2O)Under pressure, it is3000～6000ml/min.