HLN-11A portable Leeb hardness tester

HLN-11AtypePortable digital displayleeb hardness tester

■HLN-11AtypePortable digital displayLeeb hardness tester includes various hardness value conversions, built-in printerUSBOutput interface.

■ Direct displayRichter, Brinell, Roche, Vickers, Shawtensile strengthWaiting for various hardness values,

■ HLN-11AType is substitutionTH110、TH-120、TH130、TH-140、TH150、TH160、HS141、HL-80、HL-200、HL-300、HL-800Waiting for the ideal cost-effective product of Leeb hardness tester.

Product features:

·According to the principle of Leeb hardness measurement, various metal materials can be tested

·One host can be equipped with7Use different types of impact devices and automatically identify the type of impact device,No need to recalibrate during replacement

·Support“Forged steel（Steel）”Materials, when usedD/DCType impact device testing“forged steel”When testing samples, they can be directly readHBValue, no need for manual table lookup. Pre set upper and lower limits for hardness values, automatic alarm for exceeding the range, convenient for users' needs for batch testing

·Adopting a large screen128×64Graphic dot matrix LCD display, rich and intuitive information

·Full Chinese display, menu style operation, simple and convenient operation

·WithELBacklit display, convenient for use in low light environments

·Maximum storage capacity500Group (number of impacts)1～32）Hardness measurement data, each set of data including single measurement value, average value, measurement date, impact direction, frequency, material, hardness system and other information

·The thermal printer is integrated with the instrument, with fast printing speed and the ability to print inspection reports on site. Equipped with software calibration function

·Built in nickel hydrogen rechargeable battery and charger; Can work continuously for no less than150Hour; Equipped with energy-saving functions such as automatic sleep mode and automatic shutdown

·There is a remaining battery indicator icon on the LCD, which can display the remaining battery level in real time; Equipped with charging process indicators, the charging progress can be monitored at any time

haveUSBOutput interface, convenient and fast to connect withPCMachine for data exchange. It can be equipped with microcomputer software, which has rich functions such as transmitting measurement results, storing and managing measurement values, statistical analysis of measurement values, printing measurement reports, and batch setting instrument parameters, meeting higher requirements for quality assurance and management.

·The instrument is compact, portable, highly reliable, suitable for harsh operating environments, and resistant to vibration, impact, and electromagnetic interference.

·External dimensions:212mm×80mm×32mm

·Weight: 580g

■ Applicable materials:Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper forged steel

Main application areas:·Failure analysis of bearings and other components, pressure vessels, steam turbine generators and their equipment

·Heavy workpieces · Installed mechanical or permanently assembled components ·Workpieces with limited experimental space

·Require formal original records of test results and material differentiation in metal material warehouses

·Rapid inspection of multiple measurement points in a large area of large workpieces

■ Technical parameters:

·Measurement range: (170-960)HLD、(17-68.5)HRC、(13-100)HRB、(59-85)HRA、(19-651)HB、(80-976)HV、(30-100)HS

·Measurement direction: support360ºAll round and in any direction(Vertical downward, oblique downward, horizontal, oblique upward, vertical upward)

·Hardness standard: richter scaleHLBu ShiHBLuo'sHRCLuo'sHRBLuo'sHRAVickersHVXiao'sHS

·Indication error: ±4HLD(HLD=760time)

·Show off Show: dot matrixLCD，128×64Graphic dot matrix LCD

·Thermal printer: capable of printing any number of test results to meet on-site needs

·Printing paper width: （57.5±0.5）mmPrinting paper roll diameter:30mm

·Working voltage: 6VNiMH battery pack

·Charging power supply: 9V/500mACharging time2.5～3.5hour

·Continuous working time: approximately150Hour (without printing or backlight)

·Communication interface standard:USB1.1

Working conditions: Environmental temperature: Operating temperature -10～＋50℃Storage temperature:-30℃～＋60℃；

relative humidity≤90％； There is no strong vibration, strong magnetic field, corrosive medium, or severe dust in the surrounding environment.

■ Operating instructions: After booting up, it will automatically enter the main display interface:

·Battery level: Display remaining battery level

·Impact direction: Current impact direction

·Average value: Appears when the average value is displayed after reaching the set number of impacts

·Hardness standard: The hardness system of the current measured value

·Measurement value: Current single measurement value (no average prompt), current average value (with average prompt)

·Show off Show: Indicates exceeding the conversion or measurement range, indicating below the conversion or measurement range

·Materials Material: The currently set material

·Number of impacts: When measuring, display the number of completed impacts, and when setting the number of impacts using the shortcut key, display the setting

Display the corresponding number of impacts when browsing a single measurement value.

■USBData processing software:

·Storage Enter: Store the measured data

·Adjustment Out: Call out data from the host

·Fight it Printing: Print and output the data,A4interface

·Super Limitations: Over limit display after setting tolerance limits

·Qing Except for: Clear measurement data

·Connect Connect: Set up connection with the host

·Cut off Open: Set to disconnect from the host

·Below Carrying: Download data locally to achieve massive storage

·Set up Place: Parameter settings

·Help me Help: Instant Help Function

Selection of impact device:

·HLN-11AThe standard sensor isDType, suitable for most occasions
·HLN-11ADCThe type of sensor isDCType, suitable for situations with limited space, such as bucket shaped inner walls or inside assembled machinery, etc
·HLN-11A+15The type of sensor isD+15Type, suitable for grooves in the west or concave surfaces
·HLN-11ACThe type of sensor isCType, with minimal impact force, suitable for measuring workpieces with high surface quality or thin quenched and hardened layers.
·HLN-11AEThe type of sensor isEType, made of diamond material, suitable for workpieces with extremely high hardness.
·HHLN-11AGThe type of sensor isGType, suitable for casting, forging, and workpieces with rough surfaces.
·HHLN-11ADLThe type of sensor isDLType, suitable for measuring deep grooves, narrow hole bottoms, or tooth surfaces of workpieces.

■ Standard configuration:

■ User selection:

■ After sales service commitment:

1. 3Free replacement for quality issues within one month.

2. Free two-year warranty (excluding impact device)

3. Lifetime maintenance