HG-6010 Plastic Melt Index Tester

One Product Description:
This machine is designed and manufactured in accordance with the requirements of GB/T3682-2000 "Determination of Melt Mass Flow Rate and Melt Volume Flow Rate of Thermoplastic Plastics". Its main parameters meet the requirements of ISO1133-97, ASTM1238, JJG 878-1994 standards, and can be used to measure the melt mass flow rate (MFR) of various plastic materials such as ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylic ester, polyoxymethylene, and polycarbonate. It is an essential testing equipment for metrology and quality inspection units, rubber and plastic enterprises, universities, research and experimental institutes, technical supervision departments, petrochemical industries, and other industries.
II characteristic:
The heating element has been replaced by the ordinary electric heating wire used in similar products, and is made of rare alloy material nickel chromium metal die-casting, which has the characteristic of long-term high-temperature state without burning out.
III Specifications and parameters:
1. Temperature control: normal temperature~300 ℃, PID control, accuracy ± 0.1 ℃ (including over temperature protection);
2. Display resolution: 0.1 ℃;
3. Maximum power consumption: ≤ 500W;
4. Cutting device: Both automatic and manual cutting are available, with a set time of 0.1-999.9min to be set arbitrarily;
5. Volume: approximately 38 × 42 × 60cm;
6. Weight: 42kg (excluding weights);
7. Power supply: AC 1 Ø 220V;
8. Piston position detection: distance between upper and lower rings: 30mm;
9. Displacement control accuracy: ± 0.1mm;
10. Standard component parameters: Inner diameter size of the barrel: ￠ 9.550 ± 0.025mm;
Piston head size: ￠ 9.475 ± 0.01mm;
Piston head length: 6.35 ± 0.1mm;
Inner diameter size of the oral membrane: ￠ 2.095 ± 0.005mm.
4 Main configuration and accessories:
One set of host
Weights: 0.325 kg (including rod), 0.875 kg, 0.96 kg, 1.2 kg, 1.64 kg (can be increased to 21.6 kg according to user requirements)
Standard test load (5 levels in total);
Level 1: 0.325kg=(piston rod+weight tray+insulation sleeve+No.1 weight body)=3.185N
Level 2: 1.2kg=(0.325+No.2 0.875kg weight)=11.76N
Level 3: 2.16kg=(0.325+No. 3 1.835kg weight)=21.168N
Level 4: 3.8kg=(0.325+No. 4 3.475kg weight)=37.24N
Level 5: 5.0kg=(0.325+No. 5 4.675kg weight)=49N
Note: The following test loads can be added according to user requirements:
Level 1: 10.0kg=(0.325+No. 5 4.675kg weight+No. 6 5.0kg weight)=98N
Level 2: 12.5kg=(0.325+No. 5 4.675kg weight+No. 6 5.0kg weight+No. 7 2.5kg weight)=122.5N
Level 3: 21.6kg=(0.325+No. 5 4.675kg weight+No. 6 5.0kg weight+No. 7 2.5kg weight+No. 8 2.915kg weight)
enclosure:
One cleaning brush, one pipe feeder, one material guide rod, one feeding funnel, and one fine hole mold measuring gauge.