HG-3915A simply supported beam impact testing machine

NegotiableUpdate on 04/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Description: The main technical parameters of the simply supported beam impact testing machine fully comply with ISO 179, GB/T 1043, GB/T 2612, JB/T 8762, and GB4742 standards. By replacing the impact pendulum with different energies and adjusting the jaw seat, various impact tests can be conducted. This machine is a detection instrument with a reasonable structure, beautiful appearance, easy operation, and accurate data, widely used in the fields of hard plastics, fiberglass, reinforced nylon, and so on. Technical parameters of simply supported beam impact testing machine: 1. Pendulum energy, pendulum torque, and minimum division value of the scale plate are shown in the following table: Pendulum energy

Product Details

Product description of simply supported beam impact testing machine:

The main technical parameters of the simply supported beam impact testing machine fully comply withISO 179、GB/T 1043、GB/T 2612、JB/T 8762、GB4742Standard. By replacing the impact pendulum with different energies and adjusting the jaw seat, various impact tests can be conducted. This machine is a detection instrument with a reasonable structure, beautiful appearance, easy operation, and accurate data, widely used in the fields of hard plastics, fiberglass, reinforced nylon, and so on.

Technical parameters of simply supported beam impact testing machine:

1、 The minimum division values of pendulum energy, pendulum torque, and scale plate are shown in the following table:

Pendulum energy	1J	2J	4J	5J
Pendulum moment	0.516Nm	1.031Nm	2.062Nm	2.578Nm
Minimum division value of the dial	0.01J	0.02J	0.04J	0.05J

2Impact speed:2.9m/s

3Pre swing angle of pendulum:160°

4Distance from the center of the pendulum axis to the center of the specimen:221mm

5Jaw corner radius:1mm

6Impact blade angle:30°

7Impact blade fillet radius:2mm

8The sample type, size, and distance between support lines are shown in the table below (units): mm）(Detailed dimensions of the sample)

Please refer to the national standards for relevant requirementsGB/T1043—93Method for Impact Test of Rigid Plastic Simply Supported Beams

Sample type	lengthL	widthb	thicknessd	Distance between support lines
1	80±2	10±0.5	4±0.2	60
2	50±1	6±0.2	4±0.2	40
3	120±2	15±0.5	10±0.5	70
4	125±2	13±0.5	13±0.5	95