HC8300FKS24H-YC11B Wind Turbine Gearbox Filter Maintenance

HC8300FKS24H-YC11B Wind Turbine Gearbox Filter Maintenance

Daily maintenance should pay attention to the following points. The gearbox filter element is already a consumable and needs to be replaced immediately after it gets clogged.

1. Ensure that hydraulic oil is not used at high temperatures; Oil products will quickly oxidize and deteriorate at high temperatures;

2. The air filter on the hydraulic station should use a filter that can filter both particles and moisture;

3. Centrifugal dehydration/vacuum dehydration (for oil stations with moisture);

4. Regular oil testing and appropriate cleaning can also extend the service life of the gearbox filter element

HC8300FKS24H-YC11B Wind Turbine Gearbox Filter MaintenanceCharacteristics of

High filtration accuracy: The removal rate of suspended solids in water can reach over 95%, and impurities such as macromolecules, colloids, and iron can be removed. After good coagulation treatment - water, when the inlet water is 10 Newtons, the outlet water is less than 1 Newton; Fast filtration speed: generally 40m/h, up to 60m/h, which is more than three times that of ordinary sand filtration; Large pollutant holding capacity: generally 15-35kg/m3, which is more than 4 times that of ordinary sand filtration;

Low backwash water consumption rate: The backwash water consumption is less than the periodic filtration water consumption; Small footprint: The amount of water produced is the same, and the footprint is less than one-third of that of a regular sand filter. Strong adjustability: parameters such as filtration accuracy, interception capacity, and filtration resistance can be adjusted as needed; The filter material is durable and has a service life of over 20 years.

The filter element of wind turbine gearbox is an important equipment to ensure the normal operation of the gearbox. The wind turbine gearbox filter provided by Henan wind turbine gearbox filter supplier is mainly suitable for closed-loop hydraulic systems, filtering out metal particles generated by wear of various components in the closed-loop oil and rubber impurities in the seals. The transmission filter element has no dirt collector, ensuring that the pollutants settled during filter replacement can be removed together with the filter element, avoiding pollutants from falling into the fuel tank during filter replacement.

Through full flow filtration of the return oil system, it is used for filtering the hydraulic system of wind turbines, as well as filtering the pressure oil of hydraulic and lubrication systems. It filters out solid particles and colloidal substances in the working medium, effectively controlling system pollution. To ensure the effective operation of the system.