HBD5gas HF handheld hydrogen fluoride gas detector Beidouxing

• Built in microcontroller microcomputer
• Simply insert the sample at any temperature,Immediately read out the electrochemical gas parameters and temperature values
• Sound and light alarm function, alarm limit can be set, solidified with TLV, S alarm database
• 24Group data recording,Automatic or manual recording can be set
• Readable/Print Record
• Can be used for grinding bottles,Or temporary continuous analysis of pipelines
• RS232/485Duplex interface,Can be sampled online with a microcomputer
• Zero adjustment of inert gas,Calibration of standard samples or substitutes
• Supports two-phase analysis and can test dissolved gases
• Multi meter calibration, supporting cross testing of multiple gases
• All operation keyboard settings,Window prompt

H-BD5gs The tester is an intelligent system with a built-in single-chip microcomputer,The system design has advanced hardware systems. All data can be saved in case of power failure. Each instrument provides * analysis/Testing technology, the most advanced curing professional method. Capable of supporting fieldbus andRS232/485Communication interface.BD5Testers enable most instruments to provide full range testing, eliminating the hassle of range selection.

The Beidouxing handheld sensor is ingeniously designed to be similar to general instruments, directly used for grinding bottles, or connected to pipelines with pipe threads for temporary continuous detection.

H-BD5The GS analyzer also supports cross gas single gas testing. That is to say, it can also be used for testing other gases in addition to the main gas being tested. Provide information on other measurable gases in the product documentation.

HBD5gas HF handheld hydrogen fluoride gas detector Beidouxing

Usage Application

Laboratory or on-site simple gas analysis testing

The electrode can be usedZG1”Insert the pipe thread into the pipe,Continuous testing can also be performed, and grinding bottles can be inserted

Gas research

Pollution source/Research on the regularity of emission outlets

environment detection

Production safety monitoring

Technical specifications of analyzerSpecifications

• display Tool:2×16 LCD
• Analyzer resolution:24 bits (FS=+/-1280mV)

Sensor response time:< 10s， Max<60s

Environmental temperature:-30℃～70℃ (processor)

ambient humidity:0～90%R(Processor)

Power Supply:9Vcharge Battery orDC 9Vpower supply

Continuous operation of battery:>10 hr/Pressure drop alarm

Processor size:98W×180H×35D

The lower limit of temperature for general electrochemical sensors is -10°C. Upper limit of 40 or 50°C。

Safety level: intrinsic safety type

Chassis standard: IP10

Standard specifications:

General Technical Requirements for Gas Detection and Alarm Devices in Work Environment GB 12358-90

Usage

Insert the sensor into a plastic bag or container, place the measured gas inside, seal the bag to a certain extent, and hold the reading for 1 minute.

Other standard sampling methods are also acceptable, but the sensor must be tested under conditions where the atmospheric pressure does not exceed 10%.

Sensors and Technical PrinciplesSensors Technologies

HBD5gas HF handheld hydrogen fluoride gas detector Beidouxing

Components and selection information Configuration

Instrument specification selection: Model Selection for Instruments

Common professional application testers:

*Support users to configure according to their needs Explain your specific application, which will help our engineers recommend the most suitable detector to you

*No parameter conditions specified, all refer to standard 1 atmosphere, 25°C;