H15K desktop micro high-speed centrifuge

Compact and lightweight, micro high speed, instant centrifugation

Product Introduction

The H15K micro high-speed centrifuge adopts a broadband power supply design and can be used normally in 100-250V 50/60Hz power supplies, suitable for different countries and regions with unstable voltage; At the same time, the equipment is highly favored by various researchers/inspectors due to its small and exquisite size, easy use, high speed, low operating noise, and fast lifting speed.

Product Parameters:

Maximum speed 15000r/min

Maximum centrifugal force 15093 xg

Capacity 12X1.5ml (0.5ml/0.2ml adapter) or 8 × 5ml (optional)

Timing range 1S~99 min 59S/instantaneous centrifugation

Power supply AC 100-250V 50/60HZ 3A

Dimensions 240 × 220 × 170 (L × W × H) mm

Weight 3.8 kg (excluding rotor)

Product advantages

1. BLDC motor

1. Small temperature rise: Continuous operation sample temperature rise ≤ 6 ℃

2. Low noise: The noise level during equipment operation is ≤ 56dB (A)
3. Maintenance free: Equipped with advanced brushless motors, no maintenance required

4. Fast speed increase: Multiple speed increases and decreases are adjustable, and it only takes 10 seconds to reach the highest speed and fastest gear

2. Safer

1. Aluminum alloy inner cover: The ultra hard aluminum alloy inner cover makes centrifugal work safer; At the same time, the internal air guide can quickly dissipate heat.

2.10mm stainless steel shaft: The connection between the door cover and the body is made of stainless steel shaft, which has been tested for over 100000 times without damage, making it more secure to use.

3. Stainless steel rotor cover: The equipment is equipped with a special stainless steel rotor cover with a 12 × 1.5ml angle rotor, which is paired with a magnetic pick-up and drop interface to save time and effort when picking up and dropping samples.

3. More convenient

1. Resistive touch screen

·Color LCD screen, full digit display of parameters, no need for multiple times

·Automatic conversion between RPM and rcf, displayed simultaneously, without the need for manual calculation

·Resistive touch screen, can be operated normally even with gloves on

·Centrifugal parameters can also be modified during operation

·Minor increase or decrease in rotational speed and centrifugal force values

· The use of sliding blades can significantly increase or decrease the speed and centrifugal force values

2. Smart door lock: Steel door buckle+smart door lock, making centrifugal work more convenient: automatic sensing door lock, actively monitoring the opening and closing status, centrifugal completes automatic door opening, convenient for sampling.

3. Damping type opening: Damping type door cover design, after centrifugal work is completed, the door cover automatically opens and slowly opens without vibration throughout the entire process; To prevent sample oscillation to a certain extent, ensuring experimental safety and accurate data.

4. Biomimetic suction cup base: It adopts a biomimetic suction cup with strong adhesion, which is simple to fix and easy to move.

5. Magnetic rotor cover: High magnetic automatic suction rotor cover, no need to tighten, easy to move and remove.

4. More compact

compact size

240×220×170mm

Approximately the size of a regular mouse pad

5. Lightweight

3.8kg

Similar in weight to a regular rice cooker