Guangzhou liquid mouthwash packaging machine manufacturer, factory direct sales

Guangzhou liquid mouthwash packaging machine manufacturer, factory direct sales

With the economic development, the automatic packaging machine for aluminum foil PBV packaging has become more and more useful. It can not only package capsules, tablets, tablets, health products, but also liquid oral liquid, perfume, toner, sleep facial mask, etc. The effect of the flat aluminum plastic blister packaging machine is more stable and more efficient, which is also the reason why customers at home and abroad trust the flat automatic packaging machine!!

Guangzhou liquid mouthwash packaging machine manufacturer, factory direct salesOverview:

Since the establishment of our company, we have specialized in producing a series of automatic aluminum-plastic packaging machines, which can replace imported equipment with reference to technological improvements. Implementing aluminum-plastic composite sealed packaging has the advantages of extending the shelf life, beautifying the product, and reducing packaging costs. Due to its small footprint, low investment, multifunctional use, high efficiency, no pollution, and low noise, this machine is an ideal packaging equipment for implementing purification workshops and hospital reagent rooms.

Product usage scope and characteristics:

1. Adopting a new type of high-power transmission mechanism in China, the transmission shaft is driven by a chain, eliminating errors and noise from other gear transmissions.

2. The electrical appliance adopts an imported control system, which allows for the configuration of missing materials and missing particles detection and removal devices (Omron sensors) according to customer requirements. Imported frequency converter is used.

3. The whole machine adopts segmented combination: PVC forming, feeding, and heat sealing are in one section, and tropical aluminum cold forming, heat sealing, and punching are in one section for separate packaging.

4. Using a photoelectric control system, PVC、PTP、 The automatic feeding and waste edge collection device for tropical aluminum packaging ensures the synchronous stability of multiple workstations over long distances.

5. It can be equipped with a photoelectric detection and calibration device, imported stepper motor traction, graphic and text printing packaging, and optimized packaging grade.

6. This machine is suitable for: capsules, tablets, sugar coating, capsules, injections, irregular shapes, as well as medical devices, light food, electronic components bubble sealed packaging.

Working process of flat automatic bubble wrap packaging machine
1. Forming (heating up and down)-Heat sealing (upper heating)-pixelate-Indentation (with trace heating)-cutter-Forming and outputting finished products

Operating Procedures

1. Purpose: To ensure the standardized operation of the flat blister packaging machine, guarantee packaging quality, and extend the service life of the machine.

2. Scope: Suitable for the operation of flat blister packaging machines.

3. Responsibilities: The operator of the flat blister packaging machine is responsible for the implementation of this standard, and the equipment technician is responsible for supervision.

Flat automatic bubble wrap packaging machine?Pre operation process:

1. According to the safety electricity regulations, when connecting the lighting power supply and testing the power supply to the motor, turn on the power and jog the host to check if it is running normally.

2. Water supply: According to the label on the body seat, check whether there is any leakage or dripping of cooling water in and out, and ensure smooth water supply and outflow.

3. Air pump: Connect the air delivery pipe of the air machine to the airway, and turn on the air compressor at the same time. It can only be used when the air pressure reaches 0.6-0.8MPA or above.

4. Oil: Add oil into the gearbox and gearbox. Note: Add 2/3 of the oil in the gearbox.

5. VC plastic upper bearing shaft, adjust the inner and outer cone nuts, move the mold to the lower point, PVC plastic passes by, and the rear lifting seat is opened and pressed. Pay attention to the PVC plastic on the machine surface being aligned with the track, and both sides are equally uniform.

Flat automatic bubble wrap packaging machine?Operating procedure:

1. The green indicator light for turning on the power is on, and the two heating switches for forming the upper and lower parts and heat sealing are respectively turned on for operation. The temperature controller controls the forming temperature, usually pre-set at 100 º C, and the second temperature controller controls the heat sealing, pre-set at 130 º C~140 º C. The upper and lower forming and heat sealing temperature controllers preset the temperature; It depends on specific discretion.

2. Put down the pressure block on the feeding roller, the temperature of the forming heating plate is in place, and then turn on the main machine. The plastic PVC is formed first, and the forming bubble hole is in line with the hole position of the heat sealing mold. Pay attention to the heat sealing mold seat cylinder and place the heat sealing mold to press the aluminum foil, which will be driven to the punch.

Observe whether the plastic (referring to the machine surface that has become a new PVC) moves laterally. If there is a deviation, adjust the direction of the pressure roller seat to adjust the guiding direction.

3. If the aluminum foil deviates left and right, the handwheel of the roller seat can be adjusted to be correct. If there is a deviation before and after, the box can be adjusted to move.

4. After the hot sealing and loading are normal, moderately open the feeder switch and gate to allow the medicine (tablet capsules, grain clothes) to enter the feeding chamber in an appropriate amount. If there is a small amount of cylinder material, it can be manually filled. If medicine is brought into the hot sealing mold, it will seriously affect synchronization. Therefore, when the aluminum foil is sealed and stuck to the mold, it should be stopped for processing.

5. Due to the increase in drug weight, the tension of aluminum foil and the gradual change in machine temperature may vary, which may result in asynchronous molding and heat sealing, leading or lagging. First, check whether there is a negative barrier between the plastic PVC and aluminum foil, and then adjust it using the machine's fine adjustment mechanism. The fine adjustment mechanism is backward in the mold due to its adjustment distance or the front and back adjustment of the box. As shown in Figure (2), it should be placed in the middle position before starting up, and can be moved forward or backward. It can also be adjusted by moving the front box. After correct movement, the section will not be correct until more than ten versions have been completed. Therefore, do not adjust it randomly before finishing.

6. The heat sealing quality of plastic and aluminum foils (even, firm and straight bonding) is demonstrated by the temperature or pressure, and the flatness of the checkered plate. If there is a poor heat sealing, the temperature is generally appropriate, the pressure is slightly lower, the regulator is positive, and then the screw pressure is adjusted.

7. Punching offset, use layout offset for cutting, as shown in Figure (3). Stop the machine and move the manual adjustment box, the mold can now be adjusted and moved.

8. In daily operation knowledge and for operation work, it is necessary to understand the structural principle of the machine, which is driven by the cam and the roller of the top rod seat,

Up and down travel, the position of the upper cover template is fixed, and there is a poor bubble cover condition. Pay attention to the lower forming mold or heat seal to the upper dead center, fix the column nut tightly. If not careful, it is easy to cause faults, such as the roller needle of the top rod pressing biting. The troubleshooting method is shown in Figure (4).

Flat automatic bubble wrap packaging machine?Notes:

1. Please read this manual carefully before operating and using it. To prevent operational errors and damage to the machine.

2. Before installation, check if the ground level is balanced.

3. The grounding wire should be connected according to the position of the grounding label.

4. Full time personnel training for operation and maintenance.

5. The machine should be kept clean.

6. Before machine production, all parts must be refueled (refer to the operating regulations)

7. When the machine leaves the factory, the gearbox strap must be lubricated with oil, which must be added before production.

8. Suggest using an oil-free air compressor for this machine.

9. The pressure on molding, heat sealing, indentation and other parts should not be too high, otherwise it will affect the service life. The forming and indentation of the pad should leave about one millimeter of floating space.

10. When the machine is running, it is strictly prohibited to touch the running parts (especially the longitudinal and transverse sealing heating parts) with hands to ensure personal and machine safety.