Green pollution reduction and emission reduction device for automobiles

Green pollution reduction and emission reduction device for automobilesInstructions for Use

Principle and Effect

Green pollution reduction and emission reduction device for automobilesIt utilizes the high-energy effect of a strong magnetic field on fuel molecules to change their properties, enhance their activity, reduce their viscosity, increase their fogging degree, and enable the fuel to burn fully and quickly, thereby achieving fuel savings, reducing harmful gas emissions, reducing carbon deposits, increasing power, extending engine life, and prolonging the service life of three-way purifiers. The treatment of exhaust gas starts from the source. After installation, it has comprehensive benefits for both the engine and the environment.

2、 Characteristics

Adopting the "Magnet King" of today's world, with strong magnetic field, stable performance, and good usage effect;

Through testing by the automobile inspection center and automobile testing, it has been found to save 4-8% of fuel, reduce harmful gas emissions by 30-70%, and increase power by 3-5%; (Due to different vehicle conditions, driving conditions, and other factors, fuel efficiency may vary, which is a normal phenomenon.)

No need for electricity, saving energy; No additives, no pollution, harmless to the engine;

Magnetic Circuit Design，The leakage magnetic field of the shell is low and has no impact on the computer and circuit of the internal combustion engine;

Easy to install and durable.

Scope of application

Neiran machine

Gasoline vehicles, diesel vehicles, tractors, motorcycles

diesel generator

marine diesel engine

Train locomotive diesel engine

fuel stove

Installation and precautions

1. Internal combustion engine

Gasoline vehicles are installed between the gasoline filter and carburetor or electronic fuel injection, connected with pressure resistant rubber oil pipes and tightened with pipe clamps, and checked for no oil leakage or seepage.

The diesel vehicle is installed between the oil-water separator, oil filter, and high-pressure oil pump, connected with hollow screws and pressure resistant oil pipes. During installation, the air is drained, and no oil leakage or seepage is checked. The fuel saver is fixed in the appropriate position, tightened with screws, and does not loosen or fall off during use.

The motorcycle is mounted in series at the fuel inlet of the engine and connected with a heat-resistant oil pipe.

The diesel engine is installed between the oil-water separator, filter, and high-pressure oil pump, connected by pipe clamps or flanges

2. Connect the pipe buckle or flange of the fuel furnace before the nozzle

Attention: Before installation, please have a dedicated technician check the internal combustion engine for any problems, such as air supply, normal operation of each cylinder, oil leakage, etc. After repair, proceed with installation.