Glove box LED steady-state solar simulator

NegotiableUpdate on 02/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Details

The glove box type LED steady-state solar simulator uses a combination of different types of LED beads as the steady-state light source. Each type of bead is independently adjustable and can be used for IV testing of crystalline silicon, perovskite, and stacked cells and their corresponding components. The equipment is mainly equipped with a light source control system, power control system, testing system, constant temperature system, infrared temperature probe, reference battery, computer, display, etc.

The glove box type LED steady-state solar simulator can achieve standard I-V and V-I scanning, with various testing technologies such as MPPT (maximum power point tracking) and I-t (constant voltage). Test parameters such as I-V curve, P-V curve, irradiance curve, short-circuit current, open circuit voltage, peak power, peak power point voltage and current, constant voltage point current, fill factor, conversion efficiency, series resistance, parallel resistance, etc. can be obtained.

Glove box type LED steady-state solar simulator product parameters

Adaptation standards Standard	IEC60904-9:2020	IEC60904-9:2020
Light source type Light type	LED combination light source, individually adjustable for each wavelength band	LED light source, each band is adjustable independently
Cooling method Cooling	定制水冷	Water cooling
light source lifetime Light source lifetime	40000h	40000h
spectral range Spectrum wavelength	350-1150nm， Customizable UV and IR	350-1150nm， 300-350nm and 1150-1200nm can be customized
Light source grade Classfication of light source	Spectral matching degree 0.875-1.125 A+ Irradiance non-uniformity ≤ 1% A+ Irradiance instability ≤ 1% A+	Spectral match is 0.875-1.125, class A+ Irradiance non-uniformity is ≤1%, class A+ Irradiance instability is ≤1%, class A+
Range of irradiance Irradiance intensity	200W/㎡~1200W/㎡	200W/㎡~1200W/㎡
Test area Illumination area	 300 * 300mm  Other sizes can be customized	 300*300mm Other size can be customized
Test mode Test mode	In steady-state testing mode, it can be freely set from 1 second to continuous lighting, compatible with transient testing mode	Under steady-state mode, it can be set freely from 1s to continuous illumination. Besides, it is compatible with the transient test as well
Multi channel design Multi-channel testing design	36 channels can be tested simultaneously, and the number of channels can be customized	36 channels can be tested simultaneously, and the number of channels can be customized
Testing Technology Testing technology	Equipped with I-V and V-I scanning modes as standard, it has multiple testing technologies such as MPPT (Maximum Power Point Tracking) and I-t (Constant Voltage), which can be switched through software. At the same time, it integrates point by point scanning mode (meeting the scanning mode with a minimum step time of ≤ 0.2s)	It equipped with I-V, V-I scanning, MPPT (maximum power point tracking), I-t (constant voltage) and other test technologies, all these technologies can be switched by software. It also equipped point-by-point scanning ( meet the shortest scanning in step of ≤0.2s
Test battery type Measurable cell type	Polycrystalline, monocrystalline Topcon、BC、 Heterojunction CIGS、GaAs、CdTe、 Perovskite, perovskite stack, etc	Poly-crystalline, Mono-crystalline, TopCon, HJT, BC,CIGS, GaAs, CdTe and Perovskite
Additional items that can be added Optional service	 Customizable 0BB testing fixtures and perovskite adaptation fixtures  Integrated temperature control system for temperature coefficient testing Glove box (Mikolana)	 Jigs suitable for 0BB cells and perovskite can be customized  Temperature Chamber can be integrated to achieve measurement of temperature coefficient  Glove box（MIKROUNA）