German HBM sensor adhesive 1-X60 1-CA80 1-SL450

German HBM sensor adhesive 1-X60 1-CA80 1-SL450

German HBM sensor adhesive 1-X60 1-CA80 1-SL450

German HBM sensor adhesive 1-X60Introduction:

X60 adhesive, German HBM strain gauge adhesive patch adhesive, HBM 1-X60 adhesive

X60 adhesive, German HBM strain gauge adhesive patch adhesive, HBM 1-X60 adhesive

Spot supply X60 German HBM strain gauge adhesive patch adhesive

Spot supply of German HBM1-X60AB two-component strain gauge special patch adhesive

1-X60, 1-X60 adhesive HBM 1-X60 HBM adhesive HBM adhesive x60 adhesive

HBM 1-X60 adhesive from Germany

X60 is a two-component fast drying adhesive, consisting of liquid (B) and powder (A). It is very easy to mix and match; The mixing key is included in the goods.

Typical applications include: low temperature, porous materials, and for protecting cables

1-X60 * 100g ingredient A, 2x40ml ingredient B

1-X60-NP * 400g ingredient A, 2x200ml ingredient B

1-X60 and 1-X60NP include the following strain gauge installation accessories:

1. Adjusting keys

2. Mixing rod

3. Glass paper

4. Manual and Safety Data Sheet

X60: Cold cured adhesive for experimental stress analysis

Adhesive consists of two components that are easy to use in practical environments: component A is added to the measuring spoon in powder form.

B component is a liquid that can be measured with just a few drops. Mix the adhesive in the attached container to adjust its consistency.

Cold curing adhesive: cures within a few minutes. (Two minutes at 35 ° C/95 ° F, 10 minutes at 20 ° C/68 ° F, 60 minutes at 0 ° C/32 ° F)

Composed of two components (in powder and liquid)Can be used at extremely low temperatures of -200 ° C.

Enhanced formula; X60 does not contain dicyclohexyl phthalate (CAS 84-61-7).

Attention: After using the new formula, solvents cannot be used for subsequent removal. Moreover, the curing time is several minutes longer.

1. 1-X60 two-component adhesive glue

HBM Adhesive 1-X60

1-X60/A-NP

1-X60/A

1-X60-NP

2. 1-Z70 single component adhesive glue

3. 1-BCY01 catalyst

4. 1-X120 viscoelastic adhesive glue

5. 1-X280 two-component adhesive

6. 1-EP310S two-component adhesive

7. 1-EP150 thermosetting adhesive

8. 1-PU140 protective adhesive - polyurethane substrate

9. 1-SL450 Transparent Silicone Resin Protective Adhesive

10. 1-NG150 nitrile rubber protective rubber

11. 1-SG250 transparent silicone rubber protective adhesive

12. 1-AK22 putty - strain gauge protective layer

13. 1-ABM75 aluminum foil strain gauge protective layer

Company Profile: Jiangxi Saiheng Automation Equipment Co., Ltd. is located in Ganzhou City, Jiangxi Province

Our company is a modern company that integrates research and development, processing and production, and agency sales of sensors,The company's mission is to provide customers with high-quality products at more reasonable prices and with better services;

The company's philosophy is "quality first, integrity as the top priority, and attentive service". We will win customers with trust, treat every user with honesty, and act on our words with results!

Guided by customer needs and committed to improving production efficiency and quality, we continuously introduce advanced technologies and products to provide customers with more comprehensive solutions.

Our products will mainly serve industries such as textile printing and dyeing, construction engineering, food processing, transportation and logistics, academic and educational institutions, as well as water, electricity, gas, and environmental protection.

Looking forward to developing and growing together with you!

Our company sellsGerman HBM sensor adhesive 1-X60Welcome to consult!