Product Description

Gas sweep vibration ball mill

Air Swept Vibrating Ball Mill

Description:

A micro grinder is a high-frequency vibration ball mill with a built-in air blowing injector to fluidized the material bed to be ground. The air injected into the mill allows for fine grinding without the need for wet grinding. Air makes the material bed fluidized, which can remove fine ground materials and prevent the re aggregation of fine materials. The material can be effectively reduced to 45 microns (feed 20 to 50 mesh).

The spring suspended grinding chamber applies almost all the energy of the driver directly to the grinder and the material being ground. The result is that the grinder is highly efficient, with a fast grinding cycle that can grind to -1 micron, transmitting minimal force to the support foundation. It is an air sweep option for dry precision grinding, a workbench accessory for wet grinding, has low maintenance costs, and is suitable for grinding various materials.

Recommended maximum feed size: -1/4 "Type 624 Size: 2 ′ (W) x 2 ′ (L) x 2 ′ (H) Type 1040 Size: 5 ′ (L) x 4 ′ (W) x 3 ′ (H)
Rod can be used to reduce large-sized particles in a coarse mill and finely ground to -1 micron in a secondary mill equipped with balls.

The 624 model is a laboratory sized milling machine with a diameter of 6 inches and a length of 24 inches, equipped with a 1 Hp/230-460 3 Ph/50-60 Hz electric motor and a driver made of carbon steel. Optional polyurethane wear-resistant lining can also be provided. This grinder is suitable for materials weighing 20-40 pounds and is used for continuous grinding or processing.

The 1040 type is a pilot scale rolling mill with a diameter of 10 inches and a length of 40 inches, equipped with a 5 Hp/230-460 3 Ph/50-60 Hz electric motor and a driver made of carbon steel. Optional polyurethane wear-resistant lining can also be provided. This grinder is suitable for continuous grinding of materials (quartz) weighing 200-400 pounds per hour.