-
E-mail
csy17xu@163.com
- Phone
-
Address
101-12-3/F, No. 1301-8, Guanlan Community, Guanlan Street, Longhua District, Shenzhen, China
Shenzhen Fenxi Instrument Manufacturing Co., Ltd
csy17xu@163.com
101-12-3/F, No. 1301-8, Guanlan Community, Guanlan Street, Longhua District, Shenzhen, China
1、 Product Name:Gas moisture analyzer
2、 Product model:CSY-Q
3、 Product Introduction:
CSY-QGas moisture analyzerIt is a non absolute method moisture measurement instrument using moisture sensitive thin film devices, characterized by fast response, wide measurement range, sensitivity, and easy operation.
On the basis of selecting high stability humidity sensitive devices, a precise and complete gas path system and circuit design are configured, relying on strict process flow, to create a new type of dew point meter that is accurate, reliable, and fast in measurement, avoiding the weakness of easy drift of such humidity sensitive components. It has good long-term stability and is resistant to dust particles, not affected by oil and gas and most chemical gases. It is widely used for rapid detection of water content in various gases in the fields of gas production, power, petrochemicals, electronics industry, heat treatment, etc. This instrument can be used as a laboratory instrument for intermittent measurement, as well as for continuous monitoring of production processes.
Gas moisture analyzerIn addition to dew point value, there are multiple display methods such as volume ratio, and measurement data can be saved. The instrument is equipped with a large capacity rechargeable battery, which can be used for both AC and DC, making it particularly suitable for on-site testing in areas without AC power supply.
4Gas moisture analyzerTECHNICAL INDEX
1.Measurement range: Dew point-80~+20 ℃(make an appointment0.5~23632 μL/L )
2.Absolute error: ≤± at factory1 ℃; long-term(Within two years)Run ≤±3℃
3.Response time: Press63% (90%)Calculation, at dew point-40 Below ℃, increase<30”(60”),
Decrease<60”(400”)The higher the humidity, the faster the response
4.Output signal:4~20mA,RS232perhapsUSBopening(User specified)
5.Power supply: AC220±22V,50~60Hz ;DC: Instrument with built-in battery
6.Medium conditions: temperature<+60℃
Pressure<2MPa
Traffic volume200mL/min(recommend)
7.Gas moisture analyzerbodyVolume: Width x Height x Depth=260mm×170mm×300mmhttp://www.csy17.com/pro367.html