Gas analysis system for coke oven gas process

NegotiableUpdate on 01/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The gas analysis system for coke oven gas process is an automated equipment used for real-time monitoring of gas components (such as oxygen, hydrogen, methane, etc.) in coke oven gas. It is mainly used in the coking industry to ensure safe transportation and combustion control of gas

Product Details

Gas analysis system for coke oven gas processIt is an automated equipment used for real-time monitoring of gas components (such as oxygen, hydrogen, methane, etc.) in coke oven gas, mainly applied in the coking industry to ensure safe transportation and combustion control of gas.
Coke oven gas is a valuable hydrogen rich fuel produced as a byproduct of coking units, but its composition fluctuates greatly, impurities are abundant, it is prone to polymerization, crystallization, and contains highly corrosive media such as tar/naphthalene/benzene/ammonia/H ₂ S.

Product Features:

1. Customized pretreatment: pre blowing, tar dust removal, acid-base neutralization, organic matter removal, water removal, drying, pressure stabilization, constant current, etc. are carried out on the sample gas;

2. High power, high stability infrared light source, ensuring high sensitivity and stability;

3. Gold plating treatment of the measuring chamber, with strong corrosion resistance;

4. Dual range automatic switching, fully digital processing, more accurate, stable and reliable;

5. It has soft start and watchdog functions to ensure long-term reliable operation of the instrument;

6. It has status output signals such as isolation calibration, fault, alarm, and range conversion;

7. Multiple analysis modules: One analyzer can accommodate up to three analysis modules. An analysis module includes basic analysis units and necessary electrical components. Analysis modules based on different measurement principles have varying performance.

8. The sampling probe sampling PLC can control the programmer to achieve automatic sampling control. The back blowing adopts a heating device and is accompanied by an ultra stable pressure pulse back blowing to ensure that the gas path is not blocked during operation; Sampling and blowback are controlled by pneumatic ball valves with higher reliability.

Technical Specifications:

Model: XMB-CT-1000

Detecting gases: CO, CO2, O2, CH4, H2

Range: 0-100% VOL (customizable range)

Zero drift: ± 1% FS/7d

Range drift: ± 1% FS/7d
Linear error: ± 1% FS

Repeatability: ≤ 0.5%
Response time: ≤ 30s
Power: 90W

Power supply: AC (220 ± 22) V50Hz

Weight: Approximately 13Kg

Range switching: PPm VOL free conversion

Preprocessing level: Customization

Main material: 316L/304/PTFE