GT series angular stroke electric actuator

NegotiableUpdate on 04/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

GT-50 electric actuator GTE-50 electric actuator GT31 electric actuator

Product Details

GT series angular stroke electric actuator

OverviewGT series electric actuators are rotary electronic valve drive devices that control valves through external power switching or input DC current signals.
This series of electric actuators is powered by a low-speed synchronous motor and outputs torque through a gear reduction mechanism. We use high-precision and reliable potentiometers for position feedback output, and set upper and lower limit limits. We can also provide intermediate position contact output through protocol.
This series of electric actuators adopts a patch mounted large-scale integrated circuit to make servo amplifiers, forming proportional varieties (i.e. with E), and controls the valve through 4-20mA or 1-5V signals.
Main technical parameters

	GT-03			GT-50		GTE-50		Characteristics and Typical Applications ▲ Small size; ▲ Can be equipped with intermediate position contact output; ▲ Accurate travel time; ▲ Used in conjunction with small bore ball valves for industrial combustion Temperature control of oil furnace; ▲ Used in conjunction with aluminum butterfly valves for industrial gas kilns Furnace temperature control;
power supply	220V 50Hz
Operating range	0~90℃
full stroke time	15s	30s	60s	15s		30s	60s
Output Torque	2N.m	3N.m	6N.m	5N.m		10N.m	20N.m
Whole machine weight	1.2kg			2.8kg
control mode	220V 50Hz power switch				DC current and voltage
Input signal					DC4-20mA or DC1-5V
Basic error	2.5%Fs				2.5%Fs
Valve position feedback signal	0~1kΩ				DC4~20mA
insulation resistance	50MΩ
Dielectric Strength	Ac1500,1min
Output dimension axis	φ 8 or with handle			9.5×9.5
Note: E-belt servo amplifier

Installation and wiring diagram

gt-03电动执行器 GT-31电动执行器 GT-50电动执行器 GTE-50电动执行器.jpg