GMP Cosmetics Purification Workshop

Adapt to the industry:Suggested level for the cosmetics industry: 10000 to 100000

Setting up of GMPC certified purification workshop for cosmetics:

Cosmetics production factories can set up the following rooms: changing room (with two floors as needed), buffer zone, raw material pre entry room, weighing room, production room, semi-finished product storage room, filling room, packaging room, container cleaning and disinfection room, dry noise room, storage room, raw material warehouse, finished product warehouse, packaging material warehouse, inspection room, sample retention room, etc.

The total area of the production, filling, and packaging rooms of the remaining production lines shall not be less than 100m2; the total area of the filling and packaging rooms in the simple packaging production workshop shall not be less than 80m2; and the total area of the inspection room, sample retention room, and other functional areas shall not be less than 10m2.

Cosmetics GM PC certification purification vehicle amine safety measures:

Vehicles producing cosmetics containing volatile organic solvents (such as perfume, nail polish, etc.) shall be equipped with relevant fire prevention measures.

Special attention should be paid to waterproofing in the production room, and the waterproof layer should be fully lined from the ground to the ceiling. The waterproof layer of other production workshops shall not be less than 1.5m.

Cosmetics GMPC certified purification workshop lighting:

The mixed illuminance of the working face in the production workshop shall not be less than 2001X, and the mixed illuminance of the working face in the inspection site shall not be less than 2001X

It should be noted that mixed illumination refers to the combination of local lighting and general lighting, and it is not possible to use local lighting for all production positions.

Cosmetics GM PC certified purification workshop purification system:

The clean and dust-free workshop is composed of central air conditioning and air purification system, which are also the core parts of the purification system. Control the number of dust particles in the air of the purification workshop, and adjust the temperature and temperature of the workshop.

The dressing room, air shower room, and purification room are the three basic components of the workshop purification system. The air shower room is a passage for entering and exiting the clean area, using high-speed clean airflow to effectively and quickly remove dust and bacteria carried by the human body. The purification room adopts a sandwich color steel plate to isolate the space or walls, with a color steel ceiling on the upper part and a floor paved with epoxy resin.