- Phone
-
Address
Room 2501, Dongchen Building, 60 Mudan Road, Pudong New Area, Shanghai
Product Categories
Shanghai Lianhang Electromechanical Technology Co., Ltd
GENTEC-EO UV Converter BSF Series
NegotiableUpdate on 05/08
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Name: GENTEC-EO Ultraviolet Converter BSF Series $r $n $r $n Product Model: BSF23C23N $r $n $r $n Product Introduction: The ultraviolet converter extends the spectral range of BEAMAGE to the ultraviolet band using fluorescence phenomenon. The fluorescent crystal is located at the entrance of the converter, absorbing ultraviolet wavelengths and re emitting visible spectral wavelengths with lower energy.
Product Details
Product Name: GENTEC-EO UV Converter BSF Series
Product Model: BSF23C23N
Product Introduction The ultraviolet converter utilizes fluorescence phenomenon to convertThe spectral range of BEAMAGE extends to the ultraviolet band. The fluorescent crystal is located at the entrance of the converter, absorbing ultraviolet wavelengths and re emitting visible spectral wavelengths with lower energy. The rest of the device is mainly composed of optical components, and the iris aperture at the end controls the exposure of the sensor. The light emitted by fluorescent crystals is incoherent and non collimated. The multiple sets of lenses inside the converter can affect the beam size when compensating for this characteristic, so it is important to note that the ultraviolet converter has amplification properties. Similar to infrared adapters, ultraviolet converters are essentially extension tubes that can be directly fixed to the camera lens aperture. The BSF series can convert X-rays to light in the 400 nm wavelength range into visible and near-infrared wavelengths. The amplification feature allows you to image beams larger than the sensor. The output port has a built-in aperture that can control the exposure of the CMOS sensor. Detachable extension tube, easily secured to the BEAMAGE camera inlet port.
Performance characteristics:
Convert ultraviolet light into visible light
Imaging a larger beam of light
Control exposure
It can be put into use in a few minutes
Product structure and details: (Image)
Technical Specifications:
Origin: Canada
Part number:202325
Spectral range:10 to 535 nm
Max spot size: 23 mm Ø
Standard optical camera format:2/3 inch
Main tube length（L）：76.3 mm
Extend the length of the lens barrel（D）：30 mm
Overall length（OAL）：108 mm
Max input spot size: 13.8 × 18.4 mm
CMOSMax imaging size: 5.3 × 7.1 mm
Magnification factor（± 10 %）：2.6
Crystal type:C
Pixel multiplication factor (PMF)：1.4
Min measurable spot: 79 μ m
Max repetition frequency depends on crystal type: 25 Hz to 1 MHz
Crystal type:4 options to choose from
Size（Ø×D）：35 × 97 mm
Wavelength range:110 to 225 nm
Damage threshold:500 mJ/cm²
Max average power: 2 W/cm ²
Attenuation time:3 to 5 μ s
Max repetition frequency: 30 to 20 kHz
Weight:0.21 kg
Place of Origin |
Canada |
Part Number |
202325 |
spectral range |
10 to 535 nm |
Max spot size |
23 mm Ø |
Standard Optical Camera Format |
2/3 inch |
Main tube length（L） |
76.3 mm |
Extend the length of the lens barrel（D） |
30 mm |
Overall length（OAL） |
108 mm |
Max input spot size |
13.8 × 18.4 mm |
CMOSMax imaging size |
5.3 × 7.1 mm |
Magnification factor（± 10 %） |
2.6 |
Crystal type |
C |
Pixel multiplication factor (PMF) |
1.4 |
Min measurable light spot |
79 μm |
Max repetition frequency depends on crystal type |
25 Hz to 1 MHz |
Crystal type |
4 options to choose from |
Size（Ø×D） |
35 × 97 mm |
wavelength range |
110 to 225 nm |
damage threshold |
500 mJ/cm² |
Max average power |
2 W/cm² |
decay time |
3 to 5 μ s |
Max repetition frequency |
30 to 20 kHz |
weight |
0.21 kg |
Product application:
Research, electronics, automotive, aerospace, remote sensing, telecommunications
