- Phone
-
Address
Room 2501, Dongchen Building, 60 Mudan Road, Pudong New Area, Shanghai
Product Categories
Shanghai Lianhang Electromechanical Technology Co., Ltd
GENTEC-EO Power Detector XLP Series
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Name: GENTEC-EO Power Detector XLP Series $r $n $r $n Product Model: XLP12-3S-H2-D0 $r $n $r $n $r $n Product Introduction: The Gentec EO UP power detector series includes various photothermal sensors, equipped with different absorbers, aperture sizes, and cooling options. These detectors are designed to provide reliable measurements and high damage thresholds. Each detector is calibrated using traceable and certified methods to ensure high accuracy.
Product Details
Product Name: GENTEC-EO Power Detector XLP Series
Product Model: XLP12-3S-H2-D0
Product Introduction The Gentec EO UP power detector series includes a variety of photothermal sensors, equipped with different absorbers, aperture sizes, and cooling options. These detectors are designed to provide reliable measurements and high damage thresholds. Each detector is calibrated using traceable and certified methods to ensure high accuracy. The UP type detector comes standard with a 180cm flexible cable and offers two output connection options: an intelligent DB15 male interface or an Integra instrument interface (USB/RS232). The wireless (BLU) model does not come with a connecting cable. Can customize cables of different lengths or replace interface types (such as BNC, Molex, or BNC/Molex combination interfaces). If your display screen or measuring instrument cannot automatically read the wavelength correction factor, you can use the detector's "personal wavelength correction certificate" to adjust the read power value to the corrected power value at a specific wavelength.
Performance characteristics:
The uncertainty of laser calibration wavelength has now been reduced to only± 2.0 %
Low power thermoelectric stack
Thermal drift only6 µ W/° C (with infrared filter)
high sensitivity
Ultra short pulse special model
Remove harmful infrared interference
Removing power fluctuations caused by air turbulence
Selection Guide:
XLP12-3S-H2-D0 201032
XLP12-3S-H2-INT-D0 202609: USB output type
XLP12-3S-H2-BLU-D0 203544: Wireless (air) without meter
XLP12-3S-H2-IDR-D0 203391: RS-322 output type
Product structure and details:
XLP series laser power detector
protective shield
Calibration Certificate
Personal wavelength calibration certificate
Power supply and national AC power cord (applicable only to air-cooled detectors):FAN-12V； UPG-12V
beltIsolation pipe with SM1 thread: XLP12-TUBE number: 101449
Optional features and accessories:
supportSTAND-S-233：200160
supportSTAND-S-443：200234
supportSTAND-S-443-C：201102
fiber optic adapter
extension cord
Technical Specifications:
Origin: Canada
Part number:201032
Max average power (continuous): 3 W
Max average power (1 minute): 3 W
Noise equivalent power:0.5 μW
Spectral range:0.193 to 20 μ m
Typical rise time:2.5 s
Power calibration uncertainty:±2 %
Repeatability:± 0.5 %
Thermal drift:12 μW/°C
Max measurable energy: 5 J
Equivalent energy of noise:12 μJ
Min repetition cycle: 16 seconds
Max pulse width: 300 ms
Energy calibration uncertainty:± 5 %
Max average power density: 1 kW/cm ²
Max energy density: 1 J/cm ²
Cooling method: convective cooling
Aperture diameter:12 mm
Absorbent:H₂
Size（H × W × D): 73 x 73 x 20 mm (including pipe diameter of 72 mm)
Weight:0.31 kg
Place of Origin |
Canada |
Part Number |
201032 |
Max average power (continuous) |
3 W |
Max average power (1 minute) |
3 W |
Equivalent power of noise |
0.5 μW |
spectral range |
0.193 to 20 μ m |
Typical rise time |
2.5 s |
Power calibration uncertainty |
±2 % |
repetitiveness |
± 0.5 % |
thermal drift |
12 μW/°C |
Max measurable energy |
5 J |
Equivalent energy of noise |
12 μJ |
Min Repetitive Cycle |
16 s |
Max pulse width |
300 ms |
Energy calibration uncertainty |
± 5 % |
Max average power density |
1 kW/cm² |
Max energy density |
1 J/cm² |
cooling method |
Convective cooling |
Aperture diameter |
12 mm |
absorbent |
H₂ |
Size（H×W×D） |
73 x 73 x 20 mm (including pipe diameter of 72 mm) |
weight |
0.31 kg |
Product application:
Research, electronics, automotive, aerospace, remote sensing, telecommunications
