GCE argon pressure reducer has a large inventory in Tianjin

GCE argon pressure reducer has a large inventory in Tianjin

An argon pressure reducer is a device that uses the opening of the opening and closing components inside the valve body to regulate the flow rate of the medium, reduce the pressure of the medium, and adjust the opening of the opening and closing components with the help of the pressure behind the valve, so as to maintain the pressure behind the valve within a certain range. It is generally a pressure reducing device for bottled gas. Ensure that the outlet pressure remains stable when there are changes in the inlet pressure and outlet flow rate. The argon pressure reducer is specifically designed for high output pressure requirements and is used in various applications such as handicraft manufacturing and laboratories. It is suitable for argon gas welding, cutting, chemical processes, and more. By adjusting the high-pressure gas inside the cylinder to a practical pressure, stable output pressure can be ensured when there are changes in input pressure and output flow rate. How to maintain the safety of argon pressure reducer? The analysis is as follows:

1. Before the argon pressure reducer starts working, slowly open the gas valve, and then gently rotate the pressure regulating screw of the pressure reducer to regulate it, in order to avoid accidents caused by excessive force. When stopping work, loosen the pressure regulating screw.

2. Argon pressure reducers are only used for specified gases and should not be mixed to avoid crises.

3. The argon pressure reducer is prohibited from being contaminated by various oils and fats, and debris such as dirt and dust should be prevented from entering the inlet.

4. Thawing method: Only use steam or boiling water to heat, do not use a light to bake.

5. Gas cylinders are strictly prohibited from falling to the ground and should be fixed on brackets or pads at an angle greater than 45 degrees.

The argon pressure reducer can maintain a stable output pressure under working conditions where the input pressure and outlet flow rate change. Install the argon pressure reducer onto the gas cylinder valve and tighten all connecting joints. Before opening the gas cylinder valve, turn the pressure regulator adjusting screw counterclockwise until the adjusting spring is no longer under pressure. Do not stand on the front or back of the pressure regulator when opening the gas cylinder valve. The cylinder valve should slowly open until the high-pressure gauge indicates the cylinder pressure reading.

An argon pressure reducer is a gas cylinder pressure reducing device that adjusts the high-pressure gas inside the cylinder to a practical pressure for use. Mainly used in welding, cutting, chemical, pharmaceutical and health, electronics industry and other fields. This product can ensure stable output pressure regardless of changes in input pressure and output flow rate.

Product technical parameters of argon pressure reducer:

1. Using medium argon gas

2. Input pressure 15MPa

3. Adjustment range 0-1.25MPa

4. Nominal flow rate 40M3/h

5. Weight 1.3Kg

6. Dimensions 17.5 * 17 * 12.5cm

7. Installation connection size input: G5/8'mm

8. Output: M16 * 1.5mm

9. Configure pressure specification input: 0-25MP

10. Output: 0-2.5MPa or 0-0.6MPa

GCE argon pressure reducer has a large inventory in Tianjin