Fully automatic self ignition point tester

YSRD-1Fully automatic self ignition point tester

Instrument Introduction

YSRD-1Fully automatic self ignition point testerIt is designed and manufactured in accordance with the national standard GB/T5332-2007 Test Method for Ignition Temperature of Combustible Liquids and Gases, GB/T 21860-2008 Test Method for Spontaneous Combustion Temperature of Liquid Chemicals, and the power industry standard DL/T706-1999 "Determination Method for Spontaneous Combustion Point of Fire Resistant Fuel Used in Power Plants". Suitable for determining the self ignition point temperature of fire-resistant oil in the speed control system of generators above 30MW, as well as the self ignition point of other flammable liquids that meet standard requirements, but cannot detect the ignition temperature of gases.

Technical specifications

1. Working power supply: AC220V ± 10% 50Hz

2. According to standards: GB/T 5332-2007 or GB/T21860-2008 or DL/T7061999

3. Display mode: 10 inch industrial grade color LCD touch screen, fully Chinese operation interface

4. Operating System: Embedded Windows System

5. Control system: Mitsubishi PLC system, built-in 16 sets of control programs

6. Temperature control range: 80 ℃~800 ℃ Display accuracy: 0.1 ℃

7. Detection accuracy: repeatability ≤ 10 ℃, reproducibility ≤ 20 ℃

8. Data input: Touch screen data input, can input Chinese, English, numbers, punctuation, symbols, etc

9. Data output: Micro thermal printer, automatic printing, fast printing

10. Storage data: can automatically store 100 measurement results, which can be viewed or printed at any time

11. Instrument dimensions: length, width, and height 550 × 500 × 700 (mm)

12. Instrument weight: about 60kg

13. Environmental temperature: 5 ℃~30 ℃

14. Relative humidity: 30-80% RH

Performance characteristics

1. The instrument has a high degree of automation, with automatic temperature control, automatic sampling, automatic timing, automatic detection, and automatic printing of results.

2. Adopting microcomputer control technology and embedded 10 inch industrial grade color LCD touch screen.

3. Metal bath with constant temperature, fast heating speed, and no pollution.

4. The precision injection pump automatically adds samples, with a standard injection volume that can be set.

5. Automatically blow clean the flask after each sample addition.

6. Driven by a stepper motor, it has the characteristics of high precision and long service life.

7. The photoelectric detection method automatically detects the self ignition point with high detection sensitivity.

8. Built in micro thermal printer that can automatically report detection results.

9. 16 sets of measurement parameters can be preset for selection when measuring different samples.

10. The design and manufacturing comply with national standards, and the instrument program can be upgraded when the standards are revised.