Fully automatic liquid-liquid extractor

Pour a certain volume of water sample and carbon tetrachloride into the storage bottle through the nozzle of the jet bottle, and turn on the vacuum pump to suck all the carbon tetrachloride and water sample into the jet bottle through the fine pore tube at the tail of the jet bottle. Due to the heavier weight of carbon tetrachloride than water, it settles at the bottom. The fine pore tube at the tail of the jet bottle sucks carbon tetrachloride from the storage bottle to the bottom of the jet bottle. When the water sample is sucked into the jet bottle, it has already passed through carbon tetrachloride and obtained partial extraction. Then, the vacuum pump was turned off, and the carbon tetrachloride and water sample vigorously collided with the glass wall at the bottom outlet through the fine pore tube at the tail of the jet bottle, increasing the contact area between the carbon tetrachloride and the water sample, achieving the goal of full extraction.

Fully automatic liquid-liquid extractorFeatures:

High extraction efficiency, can extract 3 samples in two minutes.

High degree of automation in extraction, one click extraction.

The extraction time can be set and the extraction frequency can be adjusted.

● Avoid direct contact between toxic reagents and laboratory personnel.

Easy to clean and simple to install.

Environmental monitoring system, laboratories for petrochemical, tap water, sewage treatment, university research, pollution source enterprises, third-party testing, etc.