Fuel cell dedicated DC energy feeding electronic load

Fuel cell dedicated DC energy feeding electronic load

Fuel cell load mode

-The process of starting, preheating, loading, unloading, and stopping a programmable fuel cell chiller

-Electronic loads designed for fuel cell testing requirements, with built-in fuel cell specific DC/DC converters to meet the operating conditions of fuel cell testing platforms

-Compliant with the standard specification for stack testing: Performance test method for fuel cell engines (GB/T 24554-2009)

Power battery simulation mode

-Simulated power battery types: lead-acid battery, nickel hydrogen battery, lithium iron phosphate battery, lithium manganese oxide battery, lithium cobalt oxide battery, etc

Universal DC electronic load mode: constant resistance, constant current, constant power

Fuel cell dedicated DC energy feeding electronic load

Adopting a new generation of power modules, with low leakage current, small ripple, and high efficiency

Equipped with online insulation impedance detection function, the impedance value measurement range is 1k-1M Ω, and the accuracy is 0.2% FS

DC voltage range 24-800V, high voltage control accuracy (0.2%) FS

Four quadrant operation, energy can flow in both directions, seamless switching of energy flow, and 100% of the energy absorbed in load or discharge mode is fed back to the grid

The protection function is complete, with anti reverse connection, overvoltage, overcurrent, overheating, phase failure, short circuit and other protection functions

Equipped with local and remote control functions, supporting RS485, Ethernet, and CAN2.0B interfaces