-
E-mail
yaduxs@126.com
-
Phone
18018578786
-
Address
No. 22, Lane 928, Wenxiang Road, Songjiang District, Shanghai
Product Categories
Shanghai Yadu Electronic Technology Co., Ltd
Frequency signal isolator
NegotiableUpdate on 03/27
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Frequency signal isolator: YSD-F series [Frequency signal isolator] Input signal: 0-50 Hz、0-100Hz、0-10KHz、0-30KHz Output current: 4-20mAdc, 0-20mAdc, 0-10mA, 0-1mA, 1-5V and other special signal working power supply: AC220V，AC110V，DC220V，DC110V，DC24V Installation method: 35mm standard guide rail or screw fixed frequency signal isolator refers to the isolation and conversion of AC voltage frequency, sine wave, rectangular wave pulse frequency signals into standard analog signal outputs. It can be directly connected to a digital display meter, or connected to PLC and computer systems .....
Product Details
|
Frequency signal isolator:YSD-F series Frequency signal isolator
Input signals: 0-50Hz, 0-100Hz, 0-10KHz, 0-30KHz Output current: special signals such as 4-20mAdc, 0-20mAdc, 0-10mA, 0-1mA, 1-5V, etc Working power supply: AC220V, AC110V, DC220V, DC110V, DC24V Installation method: 35mm standard guide rail or screw fixation Frequency signal isolator refers to the process of isolating and converting AC voltage frequency, sine wave, rectangular wave pulse frequency signals into standard analog signal outputs. It can be directly connected to digital displays, PLCs, and computer systems. |
 |
|
1、 Frequency signal isolator: The YSD-F frequency signal isolator type converts sine wave and rectangular wave pulse frequency signals into standard analog signal outputs or relay contact signal outputs through isolation. It can be directly connected to digital displays, PLCs, and computer systems. This product is widely used in automatic cargo systems in the mechanical, electrical, railway, petrochemical, metallurgical, chemical, food, and wastewater treatment industries. Shanghai Yadu frequency transmitter 2、 Characteristics of frequency signal isolator: 1. Measurement: Pulse frequency signal (optocoupler, proximity switch), DC voltage, DC current, displacement signal. 2. Purpose: To isolate and convert DC voltage, DC current, potentiometer signals, temperature signals, sine wave, rectangular wave pulse frequency signals, as well as encoder or proximity optocoupler switch signals into standard analog signal outputs or relay contact signal outputs. It can be directly connected to digital displays, PLCs, and computer systems. 3. Working principle: Optocoupler linearly isolates signal to adjust output. 4. Accuracy: ± 0.2% RO 5. Output: Standard analog signals or relay contact signals such as 0~20mAdc, 4~20mAdc, 0~10Vdc, 0~5VDC, -10~0~10Vdc, etc. 3、 Technical parameters of frequency signal isolator: 1. Measurement: Power frequency signal, pulse frequency (optocoupler, proximity switch) 3. Response time:<400msec 4. Output current: 4-20mAdc, 0-20mAdc, 0-10mAdc, special signal 5. Output voltage: 0-10VDC, 1-5VDC, 0-5VDC, special signal 6. Output load: current output<750 Ω, voltage output>1000 Ω 7. Accuracy: ≤± 0.1% R0 8. Power consumption: DC power supply<3W, AC power supply<4VA 9. Shell material: ABS 10. Isolation: Input, output, power supply, and casing are isolated from each other 11. Insulation impedance:>100 Ω, DC500V 12. Working environment temperature and humidity: -10~60 ℃/less than 95% relative humidity (non condensing state) 13. Dimensions: 112 (L) × 65 (W) × 70 (H) mm 14. Installation method: 35mm standard guide rail 15. Weight approximately 200 grams 4、 Schematic diagram of frequency signal isolator selection:
|
||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||
