French Oushen 40KA3P solar lightning arrester [beam lightning protection]

NegotiableUpdate on 07/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

France applied 40KA3P solar system: ERT40-T2-600-PVERT40-T2-1000-PVERT40-T2-1500-PVERT40-T2-600-S-PVERT40-T2-1500-S-PV

Product Details

Main features:
1) A complete pre wired base facilitates the unique wiring mode of the photovoltaic system;
2) Y-shaped wiring method to avoid damage to the lightning arrester due to insulation faults in the generator circuit;
3) The lightning protection module can be distinguished by mechanical coding to avoid selecting the wrong voltage and current modules during maintenance;
4) Unique anti DC arc device to avoid accidents caused by arc pulling.

installation
1. The power connection wire should be a multi stranded copper wire with an area of not less than 6mm2, and the grounding connection wire should be a multi stranded copper wire with an area of not less than 10mm2. The connecting wire should be as short, straight, and thick as possible.
2. The front end of the lightning arrester should be connected in series with suitable backup protectors, fuses, or air switches.
Installation precautions
1. During installation, the power must be disconnected and live operation is strictly prohibited. The connecting wires must meet the requirements.
2. After installation, insert the lightning protection module into place and check if it works properly.
3. The lightning arrester does not require special maintenance, it only needs to be regularly checked for loose connections and normal status indicators.