Product Categories

Changzhou Tianjing Experimental Instrument Factory

E-mail
jttjyq@163.com
Phone
13585400372
Address
No. 22 Hongshan Road, Jincheng Industrial Park, Jintan City, Jiangsu Province

Contact Now

Freezing water bath constant temperature oscillator

NegotiableUpdate on 12/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Proper use and maintenance of the cryogenic water bath constant temperature oscillator can prolong the service life of the instrument by keeping it in good working condition

Product Details

Maintenance and upkeep of the constant temperature oscillator in a frozen water bath:

1. Proper use and maintenance of the instrument can prolong its service life by keeping it in good working condition

During continuous operation, the instrument should be regularly inspected every three months to check for any water droplets or dirt falling onto the motor and control components; Clean the dust on the axial flow fan; Check the fuse, control components, and fastening screws.

3. The bearings of the transmission part have been filled with an appropriate amount of lubricating grease (No. 1 calcium sodium based) before leaving the factory. During continuous operation of the instrument, lubricating grease should be added every six months, with a filling amount of about one-third of the bearing space. 4. Natural wear and tear of the instrument after long-term use is a normal phenomenon. After one year of use, if abnormal noise is found in the motor of the instrument; Wear of bearings in the transmission section; Loose or cracked belt; Abnormal heating and constant temperature; Malfunctions such as electronic control component failure. Our company will continue to provide services and assist in processing.

A cryogenic water bath constant temperature oscillator is simply a frequency source, commonly used in phase-locked loops. Specifically, it is a device that can convert direct current energy into alternating current energy without the need for external signal excitation. It is generally divided into two types: positive feedback and negative resistance. The so-called "oscillation" implies communication, and speed regulation often involves the process and function of oscillating from no oscillation to oscillation. A device capable of converting direct current energy into alternating current energy can be called a "speed regulating multipurpose oscillator".

1、 Application fields of frozen water bath constant temperature oscillator:

The frozen water bath constant temperature oscillator is a biochemical instrument that combines a temperature controlled constant temperature water bath and oscillator. It is mainly suitable for the oscillation cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in various universities, medical, petrochemical, health and epidemic prevention, environmental monitoring and other scientific research departments.

2、 Characteristics of the constant temperature oscillator for frozen water bath:

Temperature and speed digital display, clear and intuitive.

Equipped with mechanical timing or normally open.

The inner cavity is made of stainless steel, which has good corrosion resistance.

Universal spring clamp, with a wide range of options.

Stepless speed regulation, smooth operation, easy and safe operation.

There are small waves when oscillating, but no splashing waves.

3、 Basic parameters of water bath constant temperature oscillator:

Model Project	WHY-2	WHY-2A
Speed range	Start up~300 revolutions per minute	Start up~300 revolutions per minute
Control temperature range	Room temperature~100 ℃
Temperature fluctuations	≤±0.5℃
Temperature uniformity	≤±0.5℃
Heating power	1800W
Bottled quantity	Test tube diameter: 16 × 300 100ml × 24 200ml × 15
Timing range	0-9999 minutes or normally open
Amplitude	20mm	20mm
power supply	220V±10 ﹪ 50 Hz±1Hz
External dimensions	700×550×490

4、 Notice before using water bath oscillator

1. Please read this manual carefully before use.

2. The working surface of the machine should not be excessively smooth (such as tiles, etc.).

3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.

4. The whole machine is strictly prohibited from being used in an environment with direct sunlight.

5. The speed control should start slowly from low speed to high speed.

6. The machine may experience some displacement during high-speed oscillation, so it should be monitored by someone during use.

5、 Instructions for using water bath oscillator

1. Load the test bottle and maintain balance. If it is a dual function model, set the oscillation mode

2. Connect the power and set the timer according to the surface scale of the machine. If you need to work for a long time, adjust the timer to the "normally open" position.

3. Turn on the power switch and set the constant temperature:

(1) Place the control switch in the 'Setting' section, and the temperature displayed on the screen will be the set temperature. Adjust the knob to set it to the desired temperature for your work. (The working temperature you set should be higher than the ambient temperature. At this point, the machine will start heating up and the yellow indicator light will be on. Otherwise, the machine will not work.)

(2) Place the small switch of the control part on the 'measurement' end, and the temperature displayed on the screen will be the actual temperature of the air inside the test chamber. As the temperature inside the chamber changes, the displayed number will also change accordingly.

(3) When heated to the desired temperature, the heating will automatically stop and the green indicator light will turn on; When the heat inside the test chamber dissipates below the temperature you set, a new round of heating will begin.

4. Activate the oscillation device:

(1) Turn on the oscillation switch on the control panel, and the indicator light will turn on.

(2) Adjust the oscillation speed knob to the desired oscillation frequency.

5. Cut off the power after work, and set the speed control knob and temperature control knob to the lowest point.

6. Clean the machine and keep it clean.

6、 Precautions for digital water bath oscillator

1. Instruments should be placed on a sturdy workbench, with a clean and tidy environment and good ventilation.

2. The power socket provided by the user should have good grounding measures.

3. It is strictly prohibited to move the machine during normal operation.

4. It is strictly prohibited for objects to collide with the machine.

5. Children are strictly prohibited from approaching the machine to prevent accidents.

6. Before replacing the fuse, ensure that the power supply has been cut off.

7. After use, please clean the machine without leaving any water droplets or dirt residue.