Four circuit display regulator

The XMBA-9000 intelligent four circuit display regulator has gathered the on-site experience of many domestic experts in the design process, and is a new generation of multifunctional intelligent regulating instrument developed and designed using instrument specific ultra large scale integrated circuits. All parameter settings, function selection, and accuracy calibration of analog input and output are achieved through the buttons on the instrument panel. In order to use the instrument correctly and reasonably, and fully utilize its various functions, please read this manual carefully before use. The instrument has been correctly set according to your ordering requirements before leaving the factory. If you want to change the corresponding setting parameters, it must be operated by technical personnel familiar with the industrial control site on the basis of fully understanding the performance of this instrument. Technical parameters: 1. Input signal types: thermocouple, thermistor, linear current, linear voltage. 2. Four screen display or single screen with four light columns. 3. The zero point value, full scale value, and decimal place of each path can be defined. 4. Free selection of combination allocation of 4 relays, and also capable of achieving sound and light alarm output. 5. The four set values can independently set parameters and hysteresis intervals, and the alarm control mode can be freely selected. 6. It can achieve simultaneous transmission and output of 1-3 channels (0~10mA, 4~20mA, 0~5V, 1~5V). 7. We can provide RS485 asynchronous serial communication with multiple hosts, single host, and no host modes. Selection Table: XMBA Design Sequence 99000 Series Instrument Input Method Same Signal 1 Thermocouple E, S, B, J, T, R, N2 Thermistor .....