Foss Whirlwind Sample Grinding CT 293

Instrument Introduction:

Foss Whirlwind Sample Grinding CT 293It is specially designed for the rapid grinding of grains, seeds, feed, leaves and other samples, and can also be used in chemical, pharmaceutical and similar products. The sample can be recycled.

Foss Whirlwind Sample Grinding CT 293Design high-speed mechanical devices to grind samples. Its impeller wraps around the sample and grinds it against a wear-resistant inner surface. The ground sample will flow into the sample bottle through a fine mesh.

A large amount of air flow provides self-cleaning function and minimal temperature increase, minimizing the possibility of cross contamination between different samples during grinding. There is no need to clean between samples, and thermal degradation is also reduced to a lower limit, making the results very accurate.

The cyclone grinding process provides a very fast and convenient method, making sample preparation suitable for various types of analytical techniques. For example, Kjeldahl nitrogen determination method, infrared reflection method, direct distillation method, crude fiber determination, and Soxhlet extraction method.

Technical Specifications:

1. Application field: Crushing
2. Sample types: grains, seeds, cereals, forage, feed, leaves, tablets, tobacco, lime, coal, etc
3. Injection size: The universal injection port can reach 10 millimeters, and the large injection port can reach 40 millimeters
4. Sample size: Choosing different sizes of sieves can obtain crushed samples with different particle sizes
5. Speed: 10000 revolutions per minute
6. Grinding speed: 4g/s
7. Intermittent drive: Can be used

Key Features:

1. The sample does not heat up during the grinding process
2. A very uniform particle distribution, and the particle size of the sample can be adjusted
3. Low noise (<75 decibels)
4. The safety switch has high safety
5. There are very few maintenance requirements
6. Recommended by the Canadian Grain Association as a sample mill for near-infrared analysis
7. Recommended by AOAC as a specialized sample grinder for near-infrared analysis