Flat wire bending testing machine

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The flat wire bending test machine is used for bending tests of various electromagnetic wires such as enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped flat wires, and corresponding copper and aluminum flat wires with a width of ≤ 16mm.

Product Details

扁线弯曲试验机

Flat wire bending testing machineProduct performance characteristics:

1. Execution standard: GB/T4074.3-2008/IEC60851-3

2. Suitable for bending tests of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped flat wires, and corresponding copper and aluminum flat wires with a width of less than or equal to 16mm

3. Wide edge bending: Select the test rod (pagoda shaped test rod) according to the bending diameter specified in the product standard, and install it on the left and right sides of the workbench

4. Narrow edge bending: Select the type and size specifications of the test bar according to the bending diameter specified in the product standard and the equipped narrow edge bending test bar table

Flat wire bending testing machineMain technical parameters:

Bending host	1 # machine	Machine 2
Flange diameter	Φ260mm	Φ370mm
Bending arm length	350mm	400mm
Rotating arm rotation angle	＞180°
Quantity and diameter range of test bars	Three tower rods with a diameter of 4 to 60mm Round rod (standard multiple diameter) 88 types, with a diameter of 4 to 80mm