Flat end milling cutter with good quality

Flat end milling cutter with good qualityGenerally divided into:

1.Flat end milling cutterPerform rough milling to remove the blank, and perform precision milling on small horizontal planes or contours;

2. Ball end milling cutters for semi precision and precision milling of curved surfaces; A small knife can finely mill small chamfers on steep surfaces/straight walls.

3.Flat end milling cutterWith chamfers, it can be used for rough milling to remove blanks, and can also be used for fine milling of flat surfaces (relative to steep surfaces) with small chamfers.

4. Shaped milling cutters, including chamfering cutters, T-shaped milling cutters or drum cutters, toothed cutters, and inner R-cutters.

5. Chamfering knife, which has the same shape as the chamfer, is divided into milling cutters for round chamfering and oblique chamfering.

6. T-shaped knife, capable of milling T-shaped grooves;

7. Gear cutter, milling various types of teeth, such as gears.

8. Coarse skin cutter, designed for cutting aluminum copper alloy, can quickly process

There are two common materials for flat milling cutters: high-speed steel and hard alloy. The latter has higher hardness and stronger cutting force compared to the former, which can increase the speed and feed rate, improve productivity, make the tool less obvious, and process difficult to machine materials such as stainless steel/titanium alloy. However, the cost is higher, and it is easy to break the tool in the case of rapid alternation of cutting force.

Flat end milling cutter with good qualityExplanation of

1. Coarse tooth (2, 3) straight shank end mills are suitable for rough machining of general end face grooves and steps. Due to the small number of teeth and large helix angle of this milling cutter, the finer tooth straight shank end mill has a larger chip space, is easy to remove chips, has high tooth strength, and high processing efficiency. Fine tooth straight shank end mills are suitable for semi precision milling of general end faces.

2. In addition to 2 teeth and 3 teeth coarse teeth, there are also 4 teeth, 5 teeth, and 6 teeth fine tooth products.

3. Spiral angle 42 °

4. The material is HSS-AI and HSSE tungsten steel.

5. The 2-blade is a keyway milling cutter with a helix angle of 20 °