- Phone
-
Address
Room 203, Building 3, Xingsha International Enterprise Center, No. 68 Luosi Tang Road, Changsha Economic and Technological Development Zone, Hunan Province
Product Categories
Changsha Xinxiong Instrument Technology Co., Ltd
Flat circular wire rebound angle (softness) tester
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The flat round wire rebound angle (softness) tester is used to test the rebound of narrow edge enameled flat wires with a diameter of 0.800mm to 5.600mm and enameled round wires with a nominal diameter of 1.600mm to 5.600mm.
Product Details
BYH-52Flat circular wire rebound angle (softness) testerProduct performance characteristics:
1. Execution standard: GB/T4074.3/IEC60851-3
2. Used to test the resilience of enameled flat wires with narrow edges ranging from 0.800mm to 5.600mm and enameled round wires with nominal conductor diameters ranging from 1.600mm to 5.600mm
3. Pure mechanical, with a fan-shaped scale. The reading on the fan-shaped scale indicated by the red line at the center of the rotating arm lens is the rebound angle
4. The bending angle of the sample is greater than 30 °
5. Minimum resolution of fan-shaped scale 0.2 °
6. The adjustable range of the moving slider (contact) is 28-252mm
Flat circular wire rebound angle (softness) testerMain technical parameters:
Sample bending angle |
＞30° |
Minimum resolution of fan-shaped scale |
0.2° |
Adjustable range of moving slider (contact) |
28~252mm |
Overall dimensions |
L×W×H 460×315×120mm |
weight |
20kg |
