Flange blank stamping gasket flange blank

Stamping thicknesses of 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 25mm, 30mm. Stamping diameter: 100mm-500mm, material: carbon steel,Over the years, with scientific production processes, strict quality management, good service concepts, and reasonable sales prices, we have won a good reputation among a large number of users at home and abroad. Our products are exported to countries and regions such as the United States, Germany, Hong Kong, Australia, Southeast Asia, and Africa. The product is widely used in industries such as petroleum, chemical, light industry, aviation, electricity, heating, shipbuilding, urban construction, and oil and gas transportation. It is exported to 29 provinces, municipalities, and autonomous regions in China, as well as to countries and regions such as the United States, Singapore, India, Iran, and Pakistan. It is a national product ..

Flange blank stamping gasket flange blank

Stamped parts are manufactured through stamping with minimal material consumption. They are lightweight, have good rigidity, and after plastic deformation of the sheet metal, the internal structure of the metal is improved, resulting in an increase in the strength of the stamped parts.
⑵ Stamped parts have high uniformity in size with the same module and good interchangeability. It can meet general assembly and usage requirements without further mechanical processing.
During the stamping process, stamped parts have good surface quality and a smooth and beautiful appearance because the surface of the material is not damaged. This provides convenient conditions for surface painting, electroplating, phosphating, and other surface treatments.
In the continuous production of modern industry, flanges are inevitably affected by factors such as medium corrosion, erosion, temperature, pressure, and vibration, resulting in leakage problems. Due to errors in the processing dimensions of the sealing surface, aging of the sealing components, and improper installation and fastening, flange leakage is easily caused

Sliding flange: Sliding flanges have a lower hub because the pipeline enters the single flange before welding. This provides sufficient strength for both the internal and external welding to prevent leakage. Sliding flanges are designed to match slightly larger outer diameter pipes. They are superior to neck flange welding, as the initial cost is lower for many users, but the installation cost is unlikely to be low later because there are fewer added neck flanges.

Overlapping flange: Overlapping flanges are actually the same sliding flange, unless it is within a radius between the hole and the flange race. This is a necessary radius with a flange to accommodate the end of the overlapping stub. Usually, overlapping flanges and overlapping stubs are mated together at the end of the month to assemble the system.

The socket welding flange is a similar sliding flange, unless it has a hole and a reverse hole size. Match the counter hole with the pipeline to insert the pipeline into a sliding flange similar to a flange. Matching pipes with the same ID and diameter in smaller holes. The limitation is the built-in hole, which serves as a specialized shoulder sleeve for pipes to stay at the bottom. This eliminates any flow restrictions when using socket welding flanges.

Flange blank stamping gasket flange blank

The company specializes in producing various standard models of flange materials. Flanges are disc-shaped parts that are commonly used in pipeline engineering, and are used in pairs. In pipeline engineering, flanges are mainly used for connecting pipelines. Install a flange plate on the pipeline that needs to be connected. For low-pressure pipelines, threaded flanges can be used, and for pressures above 4 kilograms, welded flanges can be used. Add sealing points between the two flanges and tighten them with bolts. Flanges with different pressures have different thicknesses and use different bolts. Flange, also known as flange or flange It is a component that connects pipes to each other. Connected to the pipe end. There are holes on the flange that can be threaded with bolts to tightly connect the two flanges. Seal the flanges with gaskets. Flange fittings refer to fittings with flanges,Flange blank: an object used for further processing based on the finished flange product

Flange blank, flange stamping gasket, flange plate blank

⑴. Reasonable mold design. In the progressive die, the arrangement of cutting sequence may affect the accuracy of stamping part forming. For the cutting of small parts of stamped parts, a larger area of punching cutting is usually arranged first, followed by a smaller area of punching cutting to reduce the impact of punching force on the forming of stamped parts.
⑵. Press down on the material. Overcoming the traditional mold design structure, a material gap is opened on the discharge plate (i.e. when the mold is closed, the material can be compressed). For key forming parts, the discharge plate must be made into an embedded structure to facilitate the solution of grinding (pressure) damage caused by long-term stamping at the pressing part of the discharge plate, which cannot compress the material.
⑶. Add strong pressure function. Thicken the size of the unloading insert pressing part (normal unloading insert thickness H+0.03mm) to increase the pressure on the material on the concave die side, thereby suppressing the flipping and twisting deformation of the stamped part during punching.
⑷. Trim a sloping or curved surface at the end of the convex die blade. This is an effective method to reduce punching force. Reducing the buffer cutting force can alleviate the tensile force on the material on the concave die side, thereby achieving the effect of suppressing the flipping and twisting of stamped parts.
⑸. In daily mold production, attention should be paid to maintaining the sharpness of the cutting edges of the convex and concave molds. When the cutting edge wears out, the tensile stress on the material will increase, leading to an increased tendency for the stamped part to flip and twist.
⑹. Unreasonable or uneven punching gaps are also reasons for the flipping and twisting of stamped parts, which need to be overcome.

Our company's products are produced according to national standards, with strict quality control. With strong technical strength and excellent production experience, our factoryLearn management and complete the production of dozens of large-scale projects both internally and externally

The characteristics of flat welding flanges: Flat welding flanges not only save space and reduce weight, but more importantly, ensure that the joint does not leak and have good sealing performance. The reason for the reduction in compact flange size is due to the decrease in the diameter of the seal, which will reduce the cross-section of the sealing surface. Secondly, the flange gasket has been replaced by a sealing ring to ensure that the sealing surface matches the sealing surface. In this way, only a small amount of pressure is required to tighten the sealing surface. As the required pressure decreases, the size and quantity of bolts can be correspondingly reduced, so a new product with small volume and light weight (70% to 80% lighter than traditional flanges) has been designed. Therefore, the flat welding flange type is a relatively high-quality flange product that reduces weight and space, playing an important role in industrial use. In industrial pipelines, flange connections are widely used. In the home, the diameter of the pipeline is small and it is low-pressure, so flange connections cannot be seen. If there are flanged pipes and equipment everywhere in a boiler room or production site.

The national standard for flanges was jointly released by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the National Standardization Administration of China on January 10, 2011, and has been a recommended standard implemented since October 1, 2011.

GB/T 9112~9124-2010 includes a total of 13 standards:

Replaced the national standard GB/T9112-2000; GB/T10745-1989 standard

GB/T 9112-2010 Types and Parameters of Steel Pipe Flanges

GB/T 9113-2010 Integral Steel Pipe Flanges

GB/T 9114-2010 Threaded Steel Pipe Flanges with Neck

GB/T 9115-2010 Welded Steel Pipe Flanges

GB/T 9116-2010 Steel Pipe Flanges with Neck Flat Welding

GB/T 9117-2010 Steel Pipe Flanges with Neck Socket Welding

GB/T 9118-2010 Welded Ring Neck Loose Sleeve Steel Pipe Flanges

GB/T 9119-2010 Plate Flat Welded Steel Pipe Flanges

GB/T 9120-2010 Welded Ring Plate Loose Sleeve Steel Pipe Flanges

GB/T 9121-2010 Flat welding ring plate loose sleeve steel pipe flange

GB/T 9122-2010 Flanged Ring Plate Loose Steel Pipe Flanges

GB/T 9123-2010 Steel Pipe Flanges

GB/T 9124-2010 Steel Pipe Flanges