Fixed H2O2 gas detector

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ATI B12 fixed H2O2 gas detector from the United States is a two-wire H2O2 concentration probe that is a loop powered instrument. It can output a 4-20mA signal proportional to the concentration. Under a 24VDC power supply, the maximum load is 675 ohms, which can be used in most monitoring systems. In addition, it is suitable for situations where it is widely used; The transmitter can operate at 12VDC while reducing the load. In addition to detecting H2O2, the B12 online toxic and harmful gas detector can also detect various toxic and harmful gases such as bromine gas, chlorine gas, fluorine gas, and arsine.

Product Details

B12 H2O2 gas detectorIt is a circuit power supply instrument that can output 4-20mA signals proportional to concentration. With a 24VDC power supply, it can withstand a large load of 675 ohms and is suitable for most monitoring systems. In addition, it is suitable for situations where it is widely used; The transmitter can operate at 12VDC while reducing the load.

Generally, transmitters are equipped with sensors that match the housing. However, for special application systems, sensors can also be installed separately from the transmitter, with a maximum distance of 25 feet.

For special application systems, we can also provide installation sensors and sensor flow brackets. In short,ATI B12 Online Gas DetectorCan meet any special requirements.

固定式H2O2气体检测仪

Fixed H2O2 gas detectorTechnical specifications

Gas type	Users can choose from the following list
selection range	Provide standard ranges for each gas, otherwise indicate them specifically
precision	Usually 5% of the tester value, limited by the slight deviation of the calibration sample gas
Fortress restoration	土I¾F. S.
linearity	Soil 0.5% F. S
zero drift	Depending on the sensor, usually 2% F. S. per month without accumulation
range drift	Depending on the application, usually less than 3% per month
power supply	12-30VDC
output	Circuit power supply 4-20mA, maximum load 675Q, 24VDC (excluding flammable gases)
Simulation circuit	Optional outputs of 4, 12, 20, and 3.6mA (indicated by Tuo)
shell	Polystyrene NEMA 4X. Optional explosion-proof type, CLASS! , Div I,Groups B,C&D
controller	Zero point and range potentiometer are installed on the transmitter current board
temperature	-3o · c -+ss · c (oxygen-10 makes c -+ss · c)
Sensor operating pressure	7-30PSIA(O. 5-2Bar)
weight	0.25lbs (O.I 2kg), I.75lbs (O.8kg) for explosion-proof type
display	3-digit LCD (explosion-proof type without display)

、ATI B12 online toxic gas detector with optional gas types and parameters

gas	molecular formula	small range	large range	gas	molecular formula	small range	large range
Bromine gas	Br2	0-1PPM	0-200PPM	chlorine gas	C12	0-1PPM	0-200PPM
Chlorine dioxide	C1O2	0-1PPM	0-200PPM	fluorine gas	F2	0-1PPM	0-200PPM
ozone	O3	0-1PPM	0-1000PPM	ammonia	NH3	0-100PPM	0-2000PPM
carbon monoxide	CO	0-100PPM	0-10000PPM	hydrogen	H2	0-5000PPM	0-10％
oxygen	O2	0-5％	0-25％	phosgene	COCl2	0-1PPM	0-100PPM
hydrogen chloride	HCl	0-10PPM	0-200PPM	Hydrogen cyanide	HCN	0-10PPM	0-200PPM
Hydrogen Peroxide	HF	0-10PPM	0-200PPM	hydrogen sulfide	H2S	0-10PPM	0-1000PPM
nitrogen oxides	Nox	0-50PPM	0-500PPM	nitrogen dioxide	NO2	0-10PPM	0-200PPM
sulfur dioxide	SO2	0-10PPM	0-200PPM	Arsine	H3As	0-1000PPB	0-5000PPB
Diborane	B2H6	0-1000PPB	0-5000PPB	Germanene	GeH4	0-1000PPB	0-5000PPB
Hydrogen selenide	H2Se	0-1000PPB	0-5000PPB	phosphine	PH3	0-1000PPB	0-2000PPM
silane	SiH4	0-10PPM	0-200PPM		H2O2	0-10PPM	0-2000PPM
Iodine gas	I2	0-1PPM	0-200PPM	Acidic gas		0-10PPM	0-200PPM
Ethylene Oxide	C2H4O ETO	0-20PPM	0-200PPM	formaldehyde	CH2O	0-20PPM	0-200PPM
ethanol	C2H5OH	0-500PPM	0-2000PPM	acetylene	C2H6	0-500PPM	0-2000PPM
nitric oxide	NOX	0-50PPM	0-500PPM	hydrocarbon	HC	0-50PPM	0-500PPM
Dimethylamine	DMA	0-100PPM	0-200PPM

Equipment selection

Model: B12-CC-D-EEE-F Two line Toxic Gas Detector

Code meaning:

CC - Gas type

34-H2O20-10PPM

34-H2O20-2000PPM

D-transmitter housing

1-NEMA 4X

2-Explosion proof

3- Double shell (optional only for explosion-proof systems)

4-NEMA 4X，LCD 显示

5-NEMA 4X， Separated sensor, 25 foot sensor cable

6-NEMA 4X， Separated sensor, 25 foot sensor cable, LCD display

7-Insertion sensor without on-site display

8-Insertion sensor with LCD display

EEEE - Measurement Range

Use four digits to represent the actual range of gas measurement. The standard range for each gas is provided in code CC. For example, the code DDDD for 0-10PPM chlorine gas can be written as 0010, the code 0200 for 0-200PPM ammonia gas, and so on.

F - Measurement Unit

1-PPM 2-PPB 3-％ 4-％LEL

Unique moisture resistant sensor: suffix with letter C

The moisture-proof sensor has added internal heating function to prevent the formation of water droplets, which can obtain reliable data in gas emissions with saturated water vapor, solving the limitation of standard diffusion electrochemical sensors that cannot be used in such environments, ensuring their measurement stability and continuity. The suffix for equipment selection is added with the letter C

Attachment

00-0118 standard sensor calibration connector

00-0258 explosion-proof sensor calibration connector

45-0046 Explosion proof sensor with rain cover

00-0261 Combustible Gas Sensor Remote Calibration Connector

00-0253 A10 standard sensor flow component

00-0298 C10 explosion-proof sensor flow component

固定式H2O2气体检测仪