Filter polypropylene filter cartridge

The F4P series filter cartridge is a densely folded filter cartridge made of all polypropylene material. With an increase in the number of membrane folds, the effective area increases, the flow rate increases, and the pollutant holding capacity increases. It has a long service life and can effectively reduce the frequency of replacement.

characteristic advantages

• Gradual aperture structure design, large pollutant holding capacity, long lifespan
• Large pollution capacity and long lifespan
• High particle removal efficiency
• Wide chemical compatibility

Typical Applications

• Filtering of chemical raw materials and reagents
• Additive filtration
• Ultra pure water filtration
• Pre filtration of medicinal solution
• High throughput filtration of beer

生物安全性

Endotoxin:<0.25EU/ml

Dissolved substances: ≤ 50mg/10 inches

filtration area

≥0.41 m² /10”

material structure

Filter material: Polypropylene filter membrane

Center pole, outer skeleton, end cap: polypropylene

Diversion layer: polypropylene

Gaskets, gaskets: silicone rubber, fluororubber, EPDM, outsourced PTFE

job characteristics

B1: Ordinary polypropylene shell<60 ℃

B2: Polypropylene shell+end lining ＜ 85 ℃

B3: Polypropylene shell+full lining ＜ 95 ℃

Positive withstand voltage of 4 bar (23 ℃)

Reverse pressure resistance of 2 bar (23 ℃)

filtration accuracy（μm）

0.1, 0.22, 0.45, 0.65, 1.0, 3.0, 5.0，10, 20

Filter cartridge size

Outer diameter: 70mm

Length: 10 inches, 20 inches, 30 inches, 40 inches

flow characteristics

Order Information

Interface diagram