Festo FESTO solenoid valve

Festo FESTO solenoid valve
Valve function two position five way, single stable state

Drive mode electronic control

Valve size 26.5 mm

Standard nominal flow rate of 1000 l/min

Work vent G1/4

Working voltage 24V DC

Working pressure 0.15 MPa... 0.8 MPa

Working pressure 1.5 bar... 8 bar

Structural Features: Piston Gate Valve

Reset type pneumatic spring

Protection level IP65 with plug-in socket in accordance with IEC 60529 standard

Nominal diameter 6.7 mm

Exhaust function with throttling option

Sealing principle: Soft seal

Installation location optional

Locking button type manual control device

Pilot type pilot drive

Pilot gas source internal pilot

Irreversible flow direction

Symbol 00991049

Overlap positive overlap

B value 0.45

C 值 3.86 l/sbar

Closing time 22 ms

Open time 20 ms

Continuous power on rate of 100%

Maximum forward test pulse of 0 signal

2500 µs

The maximum negative test pulse with signal 1 is 1100 µ s

Characteristic parameters of the coil 24 V DC: 3.3 W

Allowable voltage fluctuation+/-10%

Working medium compressed air, in accordance with ISO 8573-1:2010 [7:4:4]

Instructions for work and pilot medium: lubricating medium can be used for work (lubricating medium must be used continuously thereafter)

Vibration resistance transportation application test, severity level 2, in compliance with FN 942017-4 and EN 60068-2-6

Impact resistance test, severity level 1, in compliance with FN 942017-5 and EN 60068-2-27 standards

Corrosion resistance level CRC 1- Low corrosion resistance

Medium temperature -5 ° C... 50 ° C

Pilot medium compressed air, compliant with ISO 8573-1:2010 [7:4:4]

Environmental temperature -5 ° C... 50 ° C

Product weight 250 g

Electrical interface type B complies with industrial standards (11 mm)

Installation method: either on the air circuit board with through holes

Ventilation interface is non tubular

Gas interface, gas port 1 G1/4

Gas interface, gas port 2 G1/4

Gas interface, gas port 3 G1/4

Gas interface, gas port 4 G1/4

Gas interface, gas port 5 G1/4

Material Description Contains Paint Wetting Defect Substances RoHS Compliant

Sealing material HNBR NBR

Shell material: refined aluminum alloy

Refined aluminum alloy material for piston slide valve

Our company, Barufbangnapilz Anwochi, has strong capabilities, including small gold wells, yuan li fu, Tianzheng, Schneider, Kunlun, and Tongtai
Advantage brand Festo FESTO SMC Yifu Men Beifu Siklao Yice Japan CKD Norguan Hardin Baode Le Ke Li
Festo FESTO solenoid valve