Feisi FTP3000 series programmable DC power supply

Feisi FTP3000 series programmable DC power supply

|Briefly describe

The FTP3000 series low-power power supply is a cost-effective, practical, and versatile power supply. It can be widely used in laboratory testing, vehicle equipment testing, solar inverter testing, DC/DC converter and inverter testing, engine start-up testing, battery automatic charging, electronic product lifecycle and other testing processes. The product is equipped with a color screen and a menu interface in both Chinese and English, making it easy and intuitive to operate. It is a commonly used configuration on the desk of power electronics engineers.

|Characteristics

Single machine range:

Voltage: 0-600V,

Current: 0-80A,

Power: 900W, 1500W;

24 bit high-resolution ADC measurement;

Power factor greater than 0.98;

Stable output with low ripple noise;

Voltage and current slope can be set;

Remote line loss compensation;

Support constant power output;

Sequence editing function, supporting loops and links;

OPP, OCP, OVP, OTP and other protection functions;

Quick call, one click call to test parameters;

The isolated composite signal terminal (optional) has * external control and internal monitoring capabilities;

Intelligent fan control to reduce noise;

TFT color LCD display screen, Chinese and English menu interface;

Equipped with RS232, LAN, CAN (optional) communication ports, supporting SCPI, ModBus, Can Open protocols;

The upper computer software and SDK development package facilitate customers' secondary development.

|Voltage and current slope settings

The FTP3000 series supports voltage slope and current slope settings. The adjustment of slope slows down the rise and fall speed of voltage (or current), which can effectively avoid the damage of surge current to DUT. The unit of voltage slope is V/s, and the unit of current slope is A/s.

|Constant power, wide range output

The FTP3000 series has a wide output range of over 3.5 times and supports constant power output function. After the output is turned on, the power supply continuously adjusts the output voltage or current to maintain a constant output power. If the load exceeds the regulation range of the power supply, the output will remain at the set value. (Note: The constant power output function is mainly used for loads with a response speed of more than 10ms.). ）

|Sequence function

The sequence function allows users to edit the voltage and current waveforms themselves. The FTP3000 series provides 20 sequence files, each file supporting up to 20 running steps. In the running steps, the output voltage, output current, and delay can be set. Sequence function support, supporting loop, link and other attributes, making it easy to achieve complex waveform output.

|Voltage ramp up and ramp down output function (RAMP)

The FTP3000 series supports voltage ramp up and ramp down function, which can slowly increase the output voltage from a low point to a high point, or slowly drop the output voltage from a high point to a low point. The RAMP function has three working modes: continuous, pulse, and toggle.

|CV, CC priority

When the power output is connected to an inductive or capacitive load, it will cause a certain degree of overshoot in the output current or voltage, which can trigger the protection of the tested equipment at a mild level, and directly cause damage to the tested equipment at a severe level. The FTP3000 series has CV and CC output priority functions to effectively suppress output overshoot and its impact.

|Simulation programming function

The FTP3000 series has two analog input ports, voltage programming and current programming, which can respectively control the output voltage and output current. The analog programming signal is a 0-5V DC voltage signal. The programming signal corresponds to an output voltage and output current of 0-100% F.S.

|Battery internal resistance simulation function

The FTP3000 series power supply has a battery internal resistance analog output function. When the output current of the power supply increases, the output voltage can be adjusted according to the user's pre-set internal resistance value.

|Composite signal port (optional)

The FTP3000 series can be equipped with a composite signal port, which has the following functions:

READY power supply working status indication;

Output mode indication;

Composite external control (can be used as a trigger or ON/OFF control signal);

Voltage and current output monitoring;

Voltage and current programming control.

|Multi interface and multi protocol

The FTP3000 series is equipped with multiple communication interfaces: RS232, LAN, CAN (optional), and supports both SCPI and Modbus communication protocols. Users can configure according to their needs in the menu, making system integration more flexible.

|Computer graphic operation software

The FTP3000 series provides an upper computer software with virtual instrument function, which can read test data in real time, generate images, export reports, print reports, etc., making it convenient for customers to use.

Feisi FTP3000 series programmable DC power supply