Feisi FT8330 series multi-channel battery simulator

Feisi FT8330 series multi-channel battery simulator

|Briefly describe

The FT8330 series battery simulator is a high-precision, multi-channel, single quadrant programmable battery simulation power supply. The single machine has 36 channels and each channel is electrically isolated, making it convenient for users to connect and connect power sources. The ultra-high output precision, ultra-low ripple, interference and other characteristics make this series of power supplies widely used in testing systems such as battery cells, supercapacitors, BMS, etc. The FT8330 series adopts a standard 19 inch chassis and provides Ethernet ports and RS485 communication interfaces, making it easy to integrate into R&D and production line automation testing platforms, and can also be used separately.

|Characteristics

Voltage output: 0-6V;

Current output: 0-1A/0-2A/0-3A;

Voltage accuracy, with a resolution of up to one ten thousandth;

Four wire wiring can effectively eliminate the measurement impact caused by wires;

The number of channels per unit can reach 36, and the number of channels can also be selected according to demand;

Each channel is isolated and can be connected in parallel or series as desired;

The temperature drift coefficient is less than 30ppm/℃;

Professional testing software that supports data reporting and analysis;

RS485 and Ethernet control interface;

Support SCPI and Modbus protocols;

Standard 19 inches, can be installed in a rack;

Intelligent fan control, long lifespan, low noise.

|Application Fields

BMS (Battery Management System) testing;

CMS (Capacity Management System) testing;

Research and development testing of charge and discharge protection board;

Battery cell testing;

Supercapacitor core testing;

Power supply testing for other types of electronic products.

| 超高集成度

The FT8330 series adopts standard 19 inch and 2 chassis specifications. A single 2U chassis can accommodate up to 24CH, while a 3U chassis can accommodate 36CH. The channels are isolated from each other, and one device can test up to 36 workstations simultaneously, effectively reducing the usage of user devices and improving testing efficiency.

|Ultra high precision

The FT8330 series has high precision, with a voltage accuracy of 0.01%+0.01% F.S. The voltage resolution is as low as 0.1mV, and the current resolution is as low as 0.1 μ A. For the testing of device power consumption in standby mode, FT8330 has a current resolution measurement of 0.1 μ A, which can easily achieve the measurement and testing of standby current.

|Series connection between channels

FT8330 has electrical isolation between each channel. When simulating multiple strings of battery cells, the simulator can support serial connection between any multiple channels, or multiple battery cell simulators can be connected in series. Users can also perform remote control and other automatic testing applications through remote interfaces.

Feisi FT8330 series multi-channel battery simulator