Fallen film evaporator EXCELLENT PROJECT

Fallen film evaporator EXCELLENT PROJECT

Performance characteristics:

1. Uniform steam heating, high heat transfer efficiency, and short heating time;

2. It can fully utilize waste heat as a heat source and reduce the amount of steam used;

3. The material is evenly distributed in each heating tube of the evaporator through the distribution device. Under the influence of gravity, vacuum induction, and airflow, the material forms a film and flows from top to bottom. During the movement, it exchanges heat with the heating steam on the outer wall of the heating tube and evaporates;

4. The evaporation process takes place in a vacuum environment, with a relatively low evaporation temperature, making the evaporator less prone to scaling; 5. It is suitable for evaporation and concentration of foaming materials. Since the feed liquid evaporates in a film form in the heating tube, vapor liquid separation is formed. At the same time, at the bottom of the effector, most of the feed liquid is pumped away. Only a small part of the feed liquid and all the secondary steam enter the separator to strengthen separation. The whole process of the feed liquid does not form too much impact, avoiding the formation of foam;

6. For the evaporation and concentration of fruit juice or dairy products, the equipment can also have sterilization function. The material is preheated first and then enters the sterilizer, which can reach 90-125 degrees Celsius and maintain it for about 30-60 seconds before entering the effect body. The material quickly flashes and the temperature drops instantly;

7. This equipment can be equipped with a CIP cleaning system to achieve on-site cleaning. The entire equipment is easy to operate and has no dead corners;

8. Can be equipped with a steam jet pump to reduce steam consumption and save operating costs;

9. This equipment continuously feeds in and out of materials;

10. This device can be configured with an automatic control system, which has complete configuration, operation, monitoring, and control functions. The system includes communication interfaces, display alarms, print reports, control, and other parts to achieve automatic control of feed quantity, heating temperature, discharge concentration, and cleaning.

Performance Characteristics：

1. Steam heating uniformity, has the characteristics of high heat transfer efficiency and short heating time.

2. It can use waste heat as heat source, reducing steam consumption.

3. The distribution device distribute the material evenly in the heating pipe of the evaporator, material will flow as membranous from top to bottom under the gravity, vacuum of induction and action of airflow, during exercise it will haveheat exchange with the heating steam on the external surface of the heating tube of evaporate.

4. The evaporation process in vacuum environment, the evaporation temperature is relatively low, the evaporator is not easy to scale.

5. Suitable for foaming material evaporation and concentration, the liquid in the heating pipe is evaporated inform of the membrane in evaporator, that will be the formation of vapor-liquid separation, at the same time in the bottom most of liquid is pumped away, only a little feed liquid mix with secondary steam enter into the separator enhanced separation, in the whole process did not form too high impact, which will avoid to form bubble.

6. For fruit juice or milk evaporation concentration, this equipment can have the functions of sterilization, material preheat at first, and then enter the sterilizer, can reach 90-125

degrees, maintain 30-60 seconds, in effect body, the material is quickly flash evaporated, temperature decline transiently.

7. Equipment can be equipped with CIP cleaning system, realize the cleaning in place, complete sets of equipment is convenient for operation, no dead angle.

8. Available to equip with a steam jet pump, reduce the steam consumption, save operation cost.

9. Equipment can continuous feeding and discharging.

10. The equipment can be deviced automatic control system, with the completely configuration, operation, monitoring and control function, system consists of communication interface, alarm, report printing, control parts, feed quantity automatic control, automatic control of heating temperature, outlet concentration automatic control, automatic control of the cleaning.

Scope of application:

Suitable for low-temperature applications in industries such as food, pharmaceuticals, chemicals, biology, environmental protection, and waste liquid recycling

Continuous evaporation concentration has significant characteristics such as high heat transfer efficiency and short material heating time

Point, more suitable for materials with heat sensitivity, foaming properties, etc.

Scope Of Application：

Applicable to the food，pharmaceutical，chemical，biological，environmental protection，waste recycling and other sectors of the low-temperature continuous evaporation and concentration，this evaporator has characteristics of high heat transfer efficiency，short heating time of materials etc，so especially suitable for heat-sensitive，foaming material etc.

Equipment composition:

Evaporator, separator, condenser, hot press pump, vacuum pump, feed liquid pump, condensate water

The system consists of pumps, operating platforms, electrical instruments, and valve pipelines.

Equipment Composition：

The evaporator，separator，condenser，heat pressure pump，vacuum pump，product liquid pump，condensate pump，operating platform，instrument and valve pipeline system etc.