Factory direct sales heat transfer machine, precision flat and circular dual-use heat transfer machine, color printing semi-automatic heat transfer machine

Scope of application: Suitable for flat surfaces of metal and plastic products/Circular precision heat transfer printing andgilding.

characteristic:

1. usePLCProgrammable controller, high sensitivity, button type control panel, simple and convenient.

2. Using magnetic powder clutch motor, the transfer film has sufficient back tension to ensure accurate positioning of the flower film during transfer printing.

3. Adopting a straight elbow cylinder lifting type, with relatively fast speed and photoelectric induction control;
4. Using a flat push cylinder and installing a stabilizing cylinder for fast operation; The workbench is adjustable in front, back, left, right, easy to operate safely and quickly;

5. Transfer pressure, temperature, and transfer time can be adjusted;
6. Electric eye device for positioning and retracting transfer film, automatic paper feeding and receiving, and adjustable;
7. The machine is customized with advanced specialized transfer printing fixtures, which have good transfer effect and stable transfer.

8The height of the hot stamping head can be adjusted; The heating tube adopts a surrounding thermal conductivity to maintain uniform temperature of the hot stamping adhesive head.

9. Increase the lifting guide column of the machine to enhance pressure and ensure even pressure distribution; Thickening the film hanger for good balance; The membrane guide rods are fixed in both ears, ensuring stable positioning of the membrane and increasing the number to four groups;

10. The workbench is made of cast iron material. Tailtail groove style adjustable front and rear, left and right sliding rails; Convenient fixture alignment and adjustment;

11.The cabinet adopts 50 * 50 * 2.0 square welding, and in addition to four column support, double flat and double column reinforcement support are also added inside; Can withstand 2 tons of transfer pressure.

Parameters:
Hot stamping diameter: 150mm
Hot stamping plane area: 250×400mm
Shuttle cylinder travel:400 mm
Maximum workpiece height: 200mm
Temperature selection range for hot stamping:Room temperature~280℃
Selection range of hot stamping pressure: ≤300kgf
Maximum hot stamping speed: 1100pcs/hr
heating power: 1000W
Gas consumption: ≤80 liter/min

Weight:200KG
External dimensions: 1300*1100*1700mm