FPQ4-35/6T20 pin type composite insulator

NegotiableUpdate on 11/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction: FPQ-35/6T-20, FPQ-35/5T-20, FPQ-35/4T20 Composite Needle Insulators Composite needle insulators have high bending resistance, superior impact resistance, seismic resistance, and explosion-proof performance. The internal insulation is reliable and lightweight, making it an ideal replacement product for traditional electric porcelain. Product Description: FPQ4-10/3T20 ◆ F represents composite; P represents needle type; Q represents anti fouling type ◆ 4 represents anti fouling level ◆ rated voltage (kv)/rated bending load (kN) ◆ T-iron cross arm; L-fiberglass cross arm;

Product Details

Composite pin insulator www.hxdlqc.cn

Composite needle insulators have high bending resistance, superior impact resistance, seismic resistance, and explosion-proof performance. The internal insulation is reliable and lightweight, making it an ideal replacement product for traditional electric porcelain.

《FPQ4-10/3T20》

◆F represents composite; P represents needle type; Q represents anti fouling type

　　◆4 represents the anti fouling level

　　◆<103="">Rated voltage (kV)/rated bending load (kN)

　　◆T-iron cross arm; L-fiberglass cross arm; M-wooden crossbar

　　◆<20> Steel foot diameter (mm)

◆Color: Omitted as deep red; H-gray; G-green;

Types of composite insulator products

　FXBW - Rod type Suspension Insulator

FPQ - Composite Pin Insulators

FZSW Composite Post Insulator

FS Composite Cross arm Insulator

FCGW - Composite Dry Wall Penetrating Sleeve

FQE (X) - Composite insulators for electrified railways

FQJ - Electrified road roof composite insulator

Usage conditions:

　·Environmental temperature -40 ° C~+40 ° C

·AC power frequency not exceeding 100Hz

·Earthquake intensity not exceeding magnitude 8

·Altitude not exceeding 1500 meters

·Maximum wind speed not exceeding 35m/s

Parameters of high-voltage line needle type composite insulator：

Product Model	Rated bending withstand load (KN)	Structural height (mm)	Minimum arc distance (mm)	Minimum nominal value creepage distance (mm)	Lower thread diameter (mm)	rated voltage (KV)	maximum voltage (KV)	Power frequency 1-minute wet withstand voltage (Effective value) not less than kV	Lightning full wave impulse withstand voltage (Peak value) not less than kV
FPQ1-10/2T16	2	240	110	300	16~20	10	12	40	90
FPQ-10/4T16	4	183	127	300	16~20	10	12	40	90
FPQ-10/3T16	3	260	184	460	16~20	10	12	50	110
FPS-105/5	5	250	173	380	16~20	10	12	42	105
FPQ4-1/3T16	3	155	85	180	16~20	1~3	12	18	45
FPQ3-10/4T16	4	210	130	320	16~20	6~10	12	42	95
FPQ3-10/5T18	5	210	130	320	18	6~10	12	42	95
FPQ3-10/6T20	6	210	130	320	20	6~10	12	42	95
FPQ4-10/3T16	3	245	170	460	16	10~15	12	50	105
FPQ4-10/4T18	4	245	170	460	18	10~15	12	50	105
FPQ4-10/5T20	5	245	170	460	20	10~15	12	50	105
FPQG4-10/5T20	3	330	260	700	20	10~15	12	50	105
FPQ4-20/5T20	5	300	215	600	20	20	12	65	150
FPQ4-35/2T20	3	400	320	835	20	35	12	90	210
FPQ4-35/6T20	6	450	370	1015	22	35	12	95	230
FPQ4-35/6T20	6	480	370	1260	22	35	12	95	230
FPS-105/5	5	230	180	380	16~20	10~15	12	45	105
FPS-105/8	8	230	180	420	16~20	10~15	12	45	105
FPS-150/5	5	300	215	600	16~20	20	12	65	150
FPS-150/12.5	12.5	325	215	575	16~20	20	12	65	150
FPS-170/12.5	12.5	350	240	650	16~20	20	12	70	170