FL-32C Separated Steel Belt Pulling Machine

NegotiableUpdate on 03/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The FL-32C type separated pneumatic steel strip tensioner is an improved version of the original FS-32B type pneumatic steel strip tensioner. It adopts a worm gear transmission with high transmission efficiency, which increases the tension force of the steel strip and extends its service life. This machine must be used in conjunction with the FS-32C pneumatic steel belt tensioning machine, suitable for bundling and packaging goods weighing less than 4000KG. It uses a gas source pressure of 0.4-0.6Mpa, an unloaded steel belt speed of 5m/min, a clamping force greater than 15KN, and a machine weight of 4.3 ± 0.2kg.

Product Details

characteristic

The FL-32C type separated pneumatic steel strip tensioning machine is based on the originalFS-32BBased on the improved pneumatic steel strip tensioning machine, it adopts worm gear transmission with high transmission efficiency, which increases the tightening force of the steel strip and extends its service life. This machine needs to be compatible withFS-32C Pneumatic Steel Belt Pulling MachineCombination of two machines, suitable for use with less than4000KGThe bundling and packaging of goods, using gas source pressure0.4-0.6MpaSpeed of unloaded steel strip>5m/minThe clamp can withstand a tensile force greater than15KNThe weight of the machine is4.3±0.2kg.

Specifications

Use air pressure	0.4-0.6MPa
Specification of bundling steel strip	width(16-32)mm thickness(0.6-1.2)mm
Tightening speed of steel strip	>5m/min
Tightening force	8000N/0.6Mpa
The whole process of bundling consumes air	1cubic meter
Equipment weight	4.3±0.2kg