FIM denitration spray gun

Spray gun parameters

Angle: 12 ° -56 °

Flow rate: 0.05-0.3L/min

Spray shape: hollow cone, solid cone, sector

Main characteristics of the FIM spray gun

◆ FIM series spray guns are divided into two spray methods, fan spray and round spray. According to the needs of customers, different shapes of spray can be selected.

◆ The spray volume of FIM micro spray nozzle is small, the average particle size is within 50 μ m, and the maximum particle size is 120 μ m. A two fluid nozzle with low air to water ratio and low flow rate.

Capable of addressing dust environmental issues in cooling towers through advanced and miniaturized design.

A sufficiently small nozzle and gun body can be easily used in harsh installation conditions. .

◆ Uniform flow distribution, suitable for most nozzle arrangements.

◆ The particle size of the whole spray area is evenly distributed, providing a very superior guarantee for the uniform evaporation and absorption reaction of the liquid.

303, 316, and 310 stainless steel are standard materials, and there is also a choice of Hastelloy materials for use in more harsh environments.

Spray shape and performance data

Flow Curve Diagram Explanation

1. Spray volume (L/min) is the spray volume of a single nozzle;

2red lineIndicates the compressed air pressure (bar);

3blue lineRepresenting the gas-liquid volume ratio;

4Green lineIndicates liquid pressure bar;

6.◆The value inside is the average particle size (um) measured by laser testing method.