FB3351GT flange pressure liquid level intelligent transmitter | FB3351GT liquid level transmitter | FB3351GT

NegotiableUpdate on 12/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The FB3351GT flange pressure and liquid level intelligent transmitter is based on the FB3351T intelligent pressure transmitter, and is formed by adding a welded sealed isolation diaphragm structure. It is combined with advanced microcontroller technology and sensor digital conversion technology, and assembled through strict process assembly

Product Details

★application

The FB3351GT flange pressure liquid level intelligent transmitter is formed by adding a welded sealed isolation diaphragm structure on the basis of the FB3351T intelligent pressure transmitter, and combining advanced microcontroller technology and sensor digital conversion technology, assembled through strict process.

Its welding sealing isolation membrane device has various forms of flange connection structures, which are used for liquid level measurement of open containers. It is particularly suitable for pressure, liquid level, and density measurement in high temperature, high viscosity, crystalline media, and easily clogged situations. It is also suitable for pressure measurement in the food, pharmaceutical, and pulp and paper industries.

«feature

★ Low temperature impact, high repeatability, and good long-term stability;

The isolation membrane material can be selected from various materials such as 316L stainless steel, Hastelloy C-276, tantalum, etc;

The process connectors are made of 304 stainless steel and have multiple standard flange installation forms;

«Technical Specifications

● Working voltage	12～30VDC
● Output signal	4～20mADC， Equipped with intelligent HART fieldbus protocol.
● Accuracy	±0.25%
● Temperature impact	≤ (0.08 · r+0.1)%/10 ℃ (r=maximum range/set range)
● Stability	≤± 0.1% F.S/12 months
● Location impact	The installation position does not affect the zero point
● Environmental temperature	－20℃～+70℃
● Medium temperature	－20℃～+130℃
● Preheating time	<15 seconds
● Vibration impact	When the vibration frequency is (20-200) Hz in any direction, the change is less than ± 0.02% F.S
● Impact impact	After a 100G impact in any direction for 11ms, the change is less than ± 0.02% F.S
● Protection level	Better than IP65
Explosion proof type	Explosion proof Exd Ⅱ CT6; The intrinsic safety Exia Ⅱ CT6 should be equipped with an external safety barrier
● Load characteristics	The relationship between load impedance RL and power supply voltage V is RL ≤ 50 (V-12) (Ω) Note: When communicating with a computer or handheld communicator, the RL is between 230 Ω and 600 Ω
● Structural materials	Shell: Polyurethane baked paint low copper cast aluminum alloy Isolation membrane material: 316L stainless steel, tantalum, Hastelloy C, 316L with ETFE anti sticking layer Process connector material: 304 stainless steel Filling fluid: Silicone oil
● Electrical connection	It can be led out from any outlet as needed, suitable for industrial cables with diameters ranging from φ 8.5 to φ 10.0 as leads for sealing The universal cable connector PG16 or M20 × 1.5 can be used for the lead out joint, and the non lead end should be sealed with an end cap

«Selection Table

FB3351GT	Intelligent transmitter for flange pressure and liquid level
┆	code name	measurement range
┆	06	0~50kPa~70kPa
┆	07	0~70kPa~100kPa
┆	08	0~70kPa~200kPa
┆	09	0~100kPa~350kPa
┆	10	0~200kPa~700kPa
┆	11	0～350kPa～1.0MPa
┆	12	0～700kPa～2.0MPa
┆	13	0～1.0MPa～3.5MPa
┆	┆	code name	output
┆	┆	S	Intelligent 4-20mADC two-wire system+fieldbus HART protocol
┆	┆	9	Special requirements
┆	┆	┆	code name	Structural materials
┆	┆	┆	code name	Nominal diameter (mm)			Insertion tube length (mm)			Isolation membrane material
┆	┆	┆	G0	50			flat			316L (stainless steel)
┆	┆	┆	A0	80			flat			316L (stainless steel)
┆	┆	┆	A2	80			50			316L (stainless steel)
┆	┆	┆	A4	80			100			316L (stainless steel)
┆	┆	┆	A6	80			150			316L (stainless steel)
┆	┆	┆	B0	100			flat			316L (stainless steel)
┆	┆	┆	B2	100			50			316L (stainless steel)
┆	┆	┆	B4	100			100			316L (stainless steel)
┆	┆	┆	B6	100			150			316L (stainless steel)
┆	┆	┆	G2	50			flat			Ha Shi C-276
┆	┆	┆	C0	80			flat			Ha Shi C-276
┆	┆	┆	G4	50			flat			Tantalum
┆	┆	┆	E0	80			flat			Tantalum
┆	┆	┆	G6	50			flat			316L with ETFE anti sticking layer
┆	┆	┆	A8	80			flat			316L with ETFE anti sticking layer
┆	┆	┆	┆	code name	Installation flange specifications
┆	┆	┆	┆	A	2〞150LB
┆	┆	┆	┆	B	2〞300LB
┆	┆	┆	┆	C	3〞150LB
┆	┆	┆	┆	D	3〞300LB
┆	┆	┆	┆	E	4〞150LB
┆	┆	┆	┆	F	4〞300LB
┆	┆	┆	┆	G	DN50 PN16/25/40
┆	┆	┆	┆	H	DN80 PN16
┆	┆	┆	┆	I	DN80 PN25/40
┆	┆	┆	┆	J	DN100 PN16
┆	┆	┆	┆	K	DN100 PN25/40
┆	┆	┆	┆	┆	code name	Install flange material
┆	┆	┆	┆	┆	1	carbon steel
┆	┆	┆	┆	┆	2	316SST
┆	┆	┆	┆	┆	┆	code name		Measure the temperature of the medium
┆	┆	┆	┆	┆	┆	1		Room temperature type (≤ 70 ℃)
┆	┆	┆	┆	┆	┆	2		High temperature type (≤ 130 ℃)
┆	┆	┆	┆	┆	┆	┆		code name	Optional parts (if not selected, do not fill in)
┆	┆	┆	┆	┆	┆	┆		M3	3 1/2LCD digital display header
┆	┆	┆	┆	┆	┆	┆		d	Explosion proof dIICT6
┆	┆	┆	┆	┆	┆	┆		i	Intrinsically safe iaIICT6
┆	┆	┆	┆	┆	┆	┆		S	Process connectors
┆	┆	┆	┆	┆	┆	┆		Y	User agreement
FB3351GT	08	S	G0	G	1	1		M3	Example of transmitter selection

Explanation: If the temperature of the measured medium continues to reach 130 ℃ or below -20 ℃, it is recommended to use a temperature isolator or capillary structure to ensure that the sensor is not damaged.