Explosion proof Hanging Scale -2-ton Explosion proof Hanging Scale - Shangqiu Explosion proof Hanging Scale

Explosion proof Hanging Scale -2-ton Explosion proof Hanging Scale - Shangqiu Explosion proof Hanging Scale
1： Common knowledge of electronic scales:
1. An electronic scale is a sensor that senses the external gravity and transmits the converted electrical signal to an electronic circuit. Do not apply excessive force when weighing, especially for small scales. Handle the items being weighed gently to avoid damaging the sensor.
2. It is necessary to charge the battery regularly, usually for about 12 hours (the time should not be too long), so that the electronic scale has a stable working voltage and improves the accuracy of weighing.
3. Electronic scales are used in dry and ventilated environments (excluding waterproof scales) because sensors and electronic components working in humid environments for a long time can shorten their service life and cause economic losses to you.
4. The electronic scale uses high computational A/D and microcontroller circuits internally. In order to ensure accurate weighing, it should be kept away from strong electromagnetic interference sources such as welding machines, drills, magnets, and large motors.
2、 Maintenance of the weighing platform:
1. There should be no stones or other foreign objects around the weighing platform, and the limit clearance should be checked and cleaned regularly to ensure it is reasonable.
2. Strictly prohibit arc welding operations on the weighing platform to avoid damaging the sensors.
3. There should be no accumulated water under the weighing platform. If there is, it should be cleaned up in a timely manner. Moisture will shorten the service life of sensors and wires, accelerate aging, and lead to various faults.
4. All connecting components of the weighing platform should be tightened with fixing screws (brushed with anti rust paint once a year).
Explosion proof Hanging Scale -2-ton Explosion proof Hanging Scale - Shangqiu Explosion proof Hanging Scale
3、 Using small knowledge:
1. When using a table/scale, it should be placed steadily (as horizontally as possible) and adjusted with all four legs to ensure accurate weight measurement.
2. Use daily *, preheat for a few minutes after turning on, observe if there is a power loss, and test if the pressure scale pan is flexible and stable.
3. Reasonably choose the use of precision, as high precision can cause unstable display. Use the factory set values.
4. Use a high-precision balance, and recalibrate every time the position changes. The workbench should be level and stable, and the operation should be light.
5. After calibration, any scale should be "turned off" and then "restarted" before it can be used normally.
6. If the empty scale is found to be unstable but the actual weighing is accurate, recalibrate the zero point. Or re weigh and calibrate.